« previous next »
Pages: 1 ... 7 8 [9] 10   Go Down

Author Topic: Crazy Al Racing's Powerdynamo Ignition/Lighting System.  (Read 164105 times)

0 Members and 3 Guests are viewing this topic.

Offline alward25

  • Moderator
  • Hero Member
  • *****
  • Posts: 1,349
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #120 on: July 17, 2015, 03:29:06 PM »
Great News!!!  We will all be waiting!
Logged
"Let there be light"

Offline 1901306708

  • Full Member
  • ***
  • Posts: 150
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #121 on: July 17, 2015, 03:39:31 PM »
what is the farthest advanced you've run it, or heard of anyone going?

also, the measurements you give, are you talking vertical or in the same plane as the plug hole. ie if you had a dial gauge threaded into the sparkplug hole, its not travelling vertical but at the same angle the plug sits.

i don't have one of those fancy setups so i'm just using the end of a caliper held vertical in the plug hole
Logged

Offline alward25

  • Moderator
  • Hero Member
  • *****
  • Posts: 1,349
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #122 on: July 17, 2015, 04:18:24 PM »
Spend the $40 on ebay to get the good one, it will be more consistent,  The first time I did not have one and used calipers and held it square on the the hole, it took longer to get right than if I had just bought the right tool.

http://www.ebay.com/itm/PVL-ENGINE-IGNITION-TIMING-TDC-DIAL-INDICATOR-POLARIS-14mm-SPARK-PLUG-THREAD-/161755672671?hash=item25a963b05f&vxp=mtr
« Last Edit: July 17, 2015, 04:19:56 PM by alward25 »
Logged
"Let there be light"

Offline 1901306708

  • Full Member
  • ***
  • Posts: 150
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #123 on: July 17, 2015, 04:32:09 PM »
not going to get it by tomorrow am unfortunately. after that, back to work and done playing.

any insight as to how far anyone has run advanced, or if you're talking vertical or the same plane as the plug hole?
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #124 on: July 17, 2015, 05:05:00 PM »
Quote from: alward25 on July 17, 2015, 04:18:24 PM
Spend the $40 on ebay to get the good one, it will be more consistent,  The first time I did not have one and used calipers and held it square on the the hole, it took longer to get right than if I had just bought the right tool.

http://www.ebay.com/itm/PVL-ENGINE-IGNITION-TIMING-TDC-DIAL-INDICATOR-POLARIS-14mm-SPARK-PLUG-THREAD-/161755672671?hash=item25a963b05f&vxp=mtr

I bought one... Last time I made my own.
It worked fine but this is too sweet to pass up  8-)
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #125 on: July 17, 2015, 10:26:24 PM »
Quote from: sandblaster on July 17, 2015, 05:05:00 PM
Quote from: alward25 on July 17, 2015, 04:18:24 PM
Spend the $40 on ebay to get the good one, it will be more consistent,  The first time I did not have one and used calipers and held it square on the the hole, it took longer to get right than if I had just bought the right tool.

http://www.ebay.com/itm/PVL-ENGINE-IGNITION-TIMING-TDC-DIAL-INDICATOR-POLARIS-14mm-SPARK-PLUG-THREAD-/161755672671?hash=item25a963b05f&vxp=mtr

I bought one... Last time I made my own.
It worked fine but this is too sweet to pass up  8-)

Made in china :-)
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #126 on: July 18, 2015, 02:34:54 PM »
And you know how I love buying junk from China  :-o
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline 1901306708

  • Full Member
  • ***
  • Posts: 150
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #127 on: July 18, 2015, 04:29:40 PM »
so the best we found was at 20.45 deg BTDC. A peak of 78, and over 70 from 7500-8500rpm. very strong.  measuring along the circumference of the rotor, its 22.5mm from the factory mark. did some math and figured out every 1.1mm is 1 degree .

going back to 2.2mm / 16.2 deg / 17.8mm you're down about 6hp over a 1000rpm range.

at 1.5mm / 13.3 deg / 14.6mm youre way off the mark. down over 10.

it will barely run when its set at TDC

didn't advance any more than 20.45 deg. thought we had gained enough. we likely could have though.

This is running c12, checking plugs, fuel flow, egts. all that good stuff. use at your own risk. Mine's staying at 20.45 though.
Logged

Offline alward25

  • Moderator
  • Hero Member
  • *****
  • Posts: 1,349
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #128 on: July 18, 2015, 04:38:02 PM »
Dimension BTDC?  When u get a chance.  Great info!
Logged
"Let there be light"

Offline 1901306708

  • Full Member
  • ***
  • Posts: 150
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #129 on: July 18, 2015, 04:52:35 PM »
my math says 3.49mm (vertical, draw some triangles and sort out correction for the plug being on an angle if you like)

can you get the timing curve for these things? would sure be handy to know if you could find out.

especially for a guy who got you all this good info!
Logged

Offline alward25

  • Moderator
  • Hero Member
  • *****
  • Posts: 1,349
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #130 on: July 18, 2015, 05:15:17 PM »
I will see what I can do.  That number would not work if using a timing dial indicator.  It would be way too retarded.
Logged
"Let there be light"

Offline 1901306708

  • Full Member
  • ***
  • Posts: 150
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #131 on: August 13, 2015, 03:23:00 PM »
were you able to get the actual timing curve?
Logged

Offline Dirty907

  • Newbie
  • *
  • Posts: 1
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #132 on: November 07, 2015, 08:52:53 AM »
Still have these setups for sale? Looking into streeting my 94 k5.
Logged

Offline alward25

  • Moderator
  • Hero Member
  • *****
  • Posts: 1,349
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #133 on: November 07, 2015, 09:42:41 AM »
Yes sir.
Logged
"Let there be light"

Offline Speedway73

  • Full Member
  • ***
  • Posts: 94
Re: Powerdynamo Ignition/ 100 watt lighting kit.
« Reply #134 on: December 28, 2015, 06:54:11 AM »
Was it ever determined if this system would work on both the KX250 and the '86/'87 Tecate 250?
Logged
Pages: 1 ... 7 8 [9] 10   Go Up
« previous next »