Site window Piston

[mwalker04]

Greetings, I've been rebuilding my 5 for the last couple weeks, frame off.
The problem is, I would like to do the top end with a site window mod, and cant get ahold of Jerry @ jfab motorsports.
I've called, Left Voicemails and emails. Cannot get ahold of him. Does anyone know anywhere else I'm able to order a site window piston? Please call me at 480-809-767(four) or email me at mwalker4338@gmail.com

Thanks all.

[oic0]

http://www.kxriders.com/forums/index.php/topic,7891.0.html

[mwalker04]

I see, I will have to hold off on the engine for now, there are plenty of other parts I can be sinking my $$ into for this frame off rebuild. Thank you.

[kaw rider]

i offer the piston mod too. let me know if you what one.

[mwalker04]

Shoot.. I just went and ordered a bunch of other crap I needed for the bike LOL. Hey, please email me with your contact information I will need to buy one of these within the next 2 weeks. mwalker4338@gmail.com or call me 480-809-7674 - Maurice.

[motodog]

I've heard the Wiseco windowed piston is the hot ticket.  Plus 3hp on the dyno.  Getting ready to do the top end on my bike, I'm definately running with one. 

[mwalker04]

Yes, It should make this dune season Interesting, I have one on the way from Kaw rider. Will post pics of the end product and My final build once its done, I have 3 weeks to get this thing together.

[kaw rider]

walker
here your piston.

[mwalker04]

I received the piston yesterday and have already installed it, Excellent workmanship and thanks for getting this out in time for my dune trip. My Pipe will be here tomorrow and Ill let you know how shes running.

[mwalker04]

Kaw rider,

Do you have any insight on the head mod discussed here on the board? Do you preform this type of machining? If so, what would you charge me if I shipped you my head? What would you charge for one of your heads and what needs to be done to the timing?

Thanks
-Maurice.

[kaw rider]

yes i can machine your head. Depends on what you use the motor for. My heads are machined different then the ones on here. I would play with the timong to see what you like.

[mwalker04]

Well, she was running rough at first. I found that the clip for the carb needle in the slide was bent to hell. The needle was sitting way lower than It should have been. A new clicp from ace hardware fixed that and shes running prime!

[mwalker04]

Here she is

[martinfan30]

Here she is

Nice ride!!

[mwalker04]

And another.