« previous next »
Pages: [1]   Go Down

Author Topic: WIDE--Foot Pegs  (Read 4798 times)

0 Members and 2 Guests are viewing this topic.

kawdude

  • Guest
WIDE--Foot Pegs
« on: March 28, 2004, 09:12:13 AM »
Being the cheap person that I am, I'm thinking about building a set of wider foot pegs for the KX.  My idea is to take the stock ones and shape a piece of 1" flat stock around them so there's approximately a 1\2" gap between the old and the new.

Has anyone tried this?
Logged

mikesmith

  • Guest
WIDE--Foot Pegs
« Reply #1 on: March 28, 2004, 02:59:05 PM »
Yes,my stock pegs are 2 1/4" wide after doing it.It was cheap and easy,but its time for new ones now,the pin holes are oval.
Logged

kawdude

  • Guest
WIDE--Foot Pegs
« Reply #2 on: March 28, 2004, 03:04:21 PM »
My pin holes are the same so I welded them shut and drilled a new hole.  Hopefully the weld will be harder than the original.  Worked like a charm.
I started making the wider pegs today and it looks pretty good.  I'll post some pics when I'm done.
Logged

mikesmith

  • Guest
WIDE--Foot Pegs
« Reply #3 on: March 29, 2004, 05:52:17 AM »
I wanted to go to the new style pegs is why Im going to replace the pegs and mounts.But Ty Davis or Terry Cable sell a kit to put a bushing in the pivot hole.
Logged

fast500#12

  • Guest
WIDE--Foot Pegs
« Reply #4 on: April 06, 2004, 12:11:55 AM »
welding the pin holes will work of a while, but the filler matterial is realitively soft compaired to the pin matterial and will wear fast compaired to new pegs. ims stainless steelys are 70 bucks at rockmountainatv.com that rock mountain atv-mc great on line parts store good prices.
Logged

mikesmith

  • Guest
WIDE--Foot Pegs
« Reply #5 on: April 06, 2004, 06:44:31 PM »
I do love Rocky Mtn.
Logged

teamgreen500

  • Guest
WIDE--Foot Pegs
« Reply #6 on: April 15, 2004, 05:36:51 PM »
IMS Pro-Pegs are BULLET-PROOF!

Manny
Logged

kawdude

  • Guest
WIDE--Foot Pegs
« Reply #7 on: April 15, 2004, 05:42:07 PM »
I got them done.  Definately not as nice as IMS but they work great.  Basically, I added about .75" around the entire peg.  Much easier on the feet.  Cost 0
Logged

teamgreen500

  • Guest
WIDE--Foot Pegs
« Reply #8 on: April 15, 2004, 05:48:04 PM »
P.S....I've got a set of stockers in the Garage....

Manny
Logged

Rick

  • Guest
WIDE--Foot Pegs
« Reply #9 on: April 20, 2004, 08:21:17 AM »
Kawdude,

So you just added a strap around the outside edge with a 3/4" gap?  I assume a couple of gussets thrown in and viola, wide foot pegs?

Rick
Logged

kawdude

  • Guest
WIDE--Foot Pegs
« Reply #10 on: April 20, 2004, 10:41:14 AM »
Yes, added the strap with two or three supports welded between the inner peg and the outer.   Then ends of strap are welded to the inner footpeg. Then I took a 3.5" grinder and cut the teeth in them.  I am still planning on posting pics.  They turned out darn good when compared to the price of aftermarket.  This pic summerizes the shape and color!
Logged
Pages: [1]   Go Up
« previous next »