Author Topic: Anyone have dynamic balancing of crank/piston assembly done?  (Read 4478 times)

0 Members and 1 Guest are viewing this topic.

VooDoo1

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« on: January 27, 2004, 03:13:34 AM »
Falicon performs a dynamic balancing service for a KX500 crank and top end assembly (piston, rings, wrist pin, etc.) for $240 (includes crank rebuild, excl. parts). I'm wondering if it's a worthwhile modification in reducing vibration in comparison to just trueing the crank? Anyone have any experience with this mod.?

kawdude

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #1 on: January 27, 2004, 12:24:13 PM »
If it does make it smoother it would be worth it to me.  I recently had Forward Motion redo my crank for 135 so Falicon would need to do something major for the additional 105 bucks.

VooDoo1

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #2 on: January 28, 2004, 01:35:07 AM »
Did the Forward Motion crank work make it noticeably smoother than stock?

kawdude

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #3 on: January 28, 2004, 05:23:54 AM »
Can't say yet.  The motor's still apart.  I do know that the old crank had a worn journal which caused excessive vibration.  I expect it will be different but by how much I don't know.

teamgreen500

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #4 on: February 03, 2004, 07:07:33 PM »
If the Top-End and Crank parts are included...it's a great deal.

Manny

kawdude

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #5 on: April 21, 2004, 10:20:19 AM »
The bike is way smoother with the new crank.  Vibration is down at least 50%.

teamgreen500

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #6 on: April 21, 2004, 10:40:51 AM »
I know EXACTLY what you mean.

Manny

kawdude

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #7 on: April 21, 2004, 01:42:50 PM »
Excellent!

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #8 on: April 21, 2004, 03:22:52 PM »
Quote from: kawdude
The bike is way smoother with the new crank.  Vibration is down at least 50%.


I also had FM redo my lower motor and it killed about 50% also, but that last 50% was killing me.  So, after a few mods, I'm down to about 10%. I bearly even notice it.

 :!:

kawdude

  • Guest
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #9 on: April 22, 2004, 03:09:13 PM »
What mods reduced the 50%???

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #10 on: April 22, 2004, 05:23:18 PM »
Pro Taper Bars, Aluminum mounts (instead of rubber), new grips, & bar inserts.. (which I got mostly from monkey butt)

Offline JBKX

  • Full Member
  • ***
  • Posts: 70
Anyone have dynamic balancing of crank/piston assembly done?
« Reply #11 on: April 23, 2004, 02:26:31 AM »
I just got my motor back from B&B Racing which did a crank rotating mass balancing.  I haven't got it back in the bike yet, but I'll let you know how it feels when it gets fired up!
2) 1986 KXT250 TECATE 3's
1986 KXT500 TECATE
2001 KX500SF