Author Topic: WOT  (Read 5650 times)

0 Members and 2 Guests are viewing this topic.

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
WOT
« on: April 12, 2009, 11:25:33 AM »
What are your thoughts on extended WOT operation??
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

stewart

  • Guest
Re: WOT
« Reply #1 on: April 12, 2009, 11:34:23 AM »
salt flats

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: WOT
« Reply #2 on: April 12, 2009, 12:13:46 PM »
Stuck throttle ?  Sudden death ? Hill climb champion ? Drag race winner ?
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline Good

  • Sr. Member
  • ****
  • Posts: 457
  • Yo.
Re: WOT
« Reply #3 on: April 12, 2009, 02:49:13 PM »
Chasing the original adrenaline? :lol:

but really, in my case, it's more like overheating and a lack of power...

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: WOT
« Reply #4 on: April 12, 2009, 03:06:38 PM »
Sorry, was in a rush when I posted. I just am curious as to extended WOT. I want to drag some buddies on their XR680R's when I go to Goler this week. I already went to 15 tooth front, but I think the 48 rear is too low. Also, I did a top end with goodies, and wonder how these beasts take WOT runs?
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Motorrad

  • Guest
Re: WOT
« Reply #5 on: April 12, 2009, 03:21:18 PM »
short answer.... Just jet it correctly
http://www.youtube.com/watch?v=evOOEnOYuOk

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: WOT
« Reply #6 on: April 12, 2009, 10:56:05 PM »
WOT with stock jetting? You can safely fall asleep with your wrist WO and drive all day without blowing up your bike. (as long as you have a nice clean air filter) :)
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline Hillclimb#42

  • Hero Member
  • *****
  • Posts: 991
  • '97 kx 500, '96 kx 250, '99 KTM 380
Re: WOT
« Reply #7 on: April 13, 2009, 01:10:25 AM »
Wide open runs may require a bigger main jet. I am sure Stewart has this figured out. :-) Pull second off the line and sit as close to the gas cap as possible, face by the number plate. No way those guys will hang. BDI probably has some good drag set-up, judging by the pics and replys.

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: WOT
« Reply #8 on: April 13, 2009, 01:26:34 AM »
OK, cool.  Cant wait to spank these guys. Gave me crap for riding a XR650L, now we'll see!!! LOL

Hey, so when does the rev limiter kick in?
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline Hillclimb#42

  • Hero Member
  • *****
  • Posts: 991
  • '97 kx 500, '96 kx 250, '99 KTM 380
Re: WOT
« Reply #9 on: April 13, 2009, 01:31:11 AM »
Doesn't matter, when the g-forces fall off, shift, hammer it. You'll be too busy with hangin' on and focusing to worry about hitting the limiter. the k5 chews up straight line runs.

Offline Billua

  • Jr. Member
  • **
  • Posts: 16
Re: WOT
« Reply #10 on: April 13, 2009, 04:48:58 AM »
Doesn't matter, when the g-forces fall off, shift, hammer it. You'll be too busy with hangin' on and focusing to worry about hitting the limiter. the k5 chews up straight line runs.

Aint that the truth!
2001 KX-500
Riding the Deserts of Nevada and Cali.

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: WOT
« Reply #11 on: April 13, 2009, 05:30:30 AM »
Cool. I'm running 15/48 now, it didn't even blink at the taller gearing. Would a smaller rear sprocket be good for dragging, or is there a point at which the engine starts to struggle with gearing? I kinda doubt it...
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: WOT
« Reply #12 on: April 13, 2009, 05:45:50 AM »
Taller gearing only comes into play at high speed.  Then the air friction can become so great that the bike will not pull full RPM in 5th.  That is why they invented fairings and V-engine road race bikes (narrower). Cam.

Offline cbxracer30

  • Sr. Member
  • ****
  • Posts: 304
Re: WOT
« Reply #13 on: April 13, 2009, 06:13:00 AM »
Cool. I'm running 15/48 now, it didn't even blink at the taller gearing. Would a smaller rear sprocket be good for dragging, or is there a point at which the engine starts to struggle with gearing? I kinda doubt it...
We're running 15/37 pulling 2nd gear hole shots , take it up too about half throttle and slide the clutch just bit you'll leave the 4bangers suckin dust. For extended WOF just make sure you're fat enough on the main jet-no white plugs.
Yep, you can ride it - if YOU can start it !!

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: WOT
« Reply #14 on: April 14, 2009, 04:18:38 AM »
Taller gearing only comes into play at high speed.  Then the air friction can become so great that the bike will not pull full RPM in 5th.  That is why they invented fairings and V-engine road race bikes (narrower). Cam.


I agree. Out on the lake ice, you get a good opportunity to feel exactly how much "gear" a KX500 can pull before you effectively "govern" the rpm's and speed. I was able to pull a max gearing of 15/42 before I felt the rpm's flatten out and not gain any more speed. Remember the KX500's tranny uses overdriven gears in BOTH 4th, and 5th.
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart