Author Topic: ATF as Gear Lube  (Read 133407 times)

0 Members and 2 Guests are viewing this topic.

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: ATF as Gear Lube
« Reply #90 on: May 27, 2009, 04:49:58 AM »
Always use use atf type f but I have used d3 with no issues. Type f just doesn't have all those additives.
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline Ahole500

  • Newbie
  • *
  • Posts: 7
Re: ATF as Gear Lube
« Reply #91 on: June 10, 2009, 02:56:22 PM »
i may be a jackass but i've run automotive WYNNS 75-90 syn gear oil in mine for 1 yr now w/ no problem.i'm a GM tech and have a couple cases and some told me they run gear oil and never had any trouble so i did and i like it.but after all this ATF talk i dont know what i should put in it never oil change  :|

Offline SlideWays

  • Jr. Member
  • **
  • Posts: 23
  • Real Men Ride 2-Strokes
Re: ATF as Gear Lube
« Reply #92 on: June 13, 2009, 03:44:17 PM »
I made the switch to ATF type F a few months ago in my 98 KX 250, I had been running Royal Purple synthetic prior to switching. My clutch would stutter when cold at the beginning of the ride, since changing to ATF have not had the problem. Royal Purple cost $15.00 a quart vesus $1.98 for the ATF, I change mine at 10 hor intervals.

My 2000 KX 250 is starting to stutter now, :| so will make the change in it as well.

Slideways
Over Confidence x Harsh Reality = Face Plant

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: ATF as Gear Lube
« Reply #93 on: June 21, 2009, 04:45:10 PM »
I finally tried ATF type F in my red 450.  Gave me a huge improvement in clutch feel and slipping modulation, which lead to far less stalling in the ugly stuff.  Trans shifted quite a bit better and my occasional missed shifts went away.  Prior oil used was regular 10W40 motorcycle oil. Great results overall. Cam.

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: ATF as Gear Lube
« Reply #94 on: July 27, 2009, 06:41:20 AM »
How is this for a suprise.  I switched to Shell Rotella T 15W40 and got a slight but definite improvement over the ATF.  Both shifting and clutch action were again improved. Rode a whole day without a missed shift - first time ever. Cam.

Offline jfabmotorsports.com

  • Moderator
  • Hero Member
  • *****
  • Posts: 602
Re: ATF as Gear Lube
« Reply #95 on: July 28, 2009, 12:13:48 AM »
I finally tried ATF type F in my red 450.  Gave me a huge improvement in clutch feel and slipping modulation, which lead to far less stalling in the ugly stuff.  Trans shifted quite a bit better and my occasional missed shifts went away.  Prior oil used was regular 10W40 motorcycle oil. Great results overall. Cam.


KXcam,  You had better clear up how it is even posible that you can use ATF in a Honda 450 before someone tries it in a Kawasaki 450f. Way different deal!!!!
Don't just float through life, make waves!

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: ATF as Gear Lube
« Reply #96 on: July 28, 2009, 03:14:04 AM »
Yes good point - I don't want to mislead anyone.  ATF CAN NOT be used as an engine oil or in a bike where the trans and engine oil are shared!! The CRF450 has separate engine and trans oil so I can run different oils for each if I choose. In my KX500 the ATF was the best trans oil I tried.  I was just trying to point out that I got improved shifting and clutch action ABOVE what the ATF did for me, using the Rotella T (using the honda as a test bench). I would be nice for someone to do back to back rides with ATF and then Rotella T with a KX500 to test if the improvements I noticed are universal, or specific to the bike model I have. Cam.

Offline bob larry

  • Full Member
  • ***
  • Posts: 150
Re: ATF as Gear Lube
« Reply #97 on: December 16, 2009, 09:28:34 AM »
Been using it for two summers now.  Motomaster ATF f
Works great for $4.  I change it every weekend
2001 KX500

Offline weymouth399

  • Full Member
  • ***
  • Posts: 123
Re: ATF as Gear Lube
« Reply #98 on: January 18, 2010, 02:40:23 AM »
I have alway used atf dex2 changed every 5 gals or so (two rides top) never thought about any other, it always worked realy good
years ago i used gearsaver (when i worked at a dealership) too pricey plus didn't clean like atf till you open your clutch and replace them aluminum plates most oil will turn to sluge if not changed daily
  bob
93 KX500 ice bike for sale
00 KX 500 ice/dirt
04 KDX220 dirt
04 Kx 500 ice bike
08 KLX 450 on/off
72CT90x2 for sale
76LB80Chappy
86FJ1200
89FJ1200

Offline ThrottleJunky

  • Full Member
  • ***
  • Posts: 104
Re: ATF as Gear Lube
« Reply #99 on: January 28, 2010, 07:00:18 PM »
Yep, I've been using  ATF in 2 stroke trannys since '00.   I was a straight 30 wt. guy.  Didn't want to change until one day at the track, I had no choice.   Worked just fine.    Got to where I don't even look to see which type it is.   Important part is to change it often. It's cheap!
'There's more living in five minutes flat-out on a bike than some men have in an entire life'.

Offline wickedwon

  • Newbie
  • *
  • Posts: 2
Re: ATF as Gear Lube
« Reply #100 on: February 02, 2010, 03:58:43 AM »
I have been using ATF for year. read about it in one of ERIC GORR's books. Works fine. Only problem I hade was in a older 125, it started showing main seal leak. I keep reading the work "cheap", don"t use cheap fuilds! I use the B&M trick. which you can buy just about everywere.    good luck

Offline tschisi

  • Full Member
  • ***
  • Posts: 170
Re: ATF as Gear Lube
« Reply #101 on: March 04, 2010, 07:02:44 PM »
It seems that i?m the only one with major ATF-Problems.
I put it in my k5, in my CRF450, and in the 125 ktm of a friend of mine.
The k5 is the only one that runs good with it.
In my CRF the gear-shift mechanism quit it?s work and in the ktm the spring that puts the shift lever back to the center position broke, both immediately after the oil change.
I could fix both but that was just annoying...
arrgh! 
2004 kx125
1990 kx500 (sold)

stewart

  • Guest
Re: ATF as Gear Lube
« Reply #102 on: March 05, 2010, 12:56:02 AM »
i talked with the oil reps and atf is not right for these dirt bike transmissions

Offline ToomanyKaws

  • Full Member
  • ***
  • Posts: 115
Re: ATF as Gear Lube
« Reply #103 on: March 20, 2010, 05:44:36 PM »
Rode four rides with ATF and changed it every two.  I just went back to Belray Gearsaver.  I didn't like the looks of the ATF when it came out of the 500 trannys.   See more super fine metal in the ATF where on any of my KX, KDX bikes I don't see hardly any with the Belray.
Same thing with two stroke oil.   People constantly switching brands.   Like the Redline two stroke oil by the gallon.    Haven't done any top ends in a long time.

Offline blueoval

  • Sr. Member
  • ****
  • Posts: 303
Re: ATF as Gear Lube
« Reply #104 on: March 20, 2010, 06:23:10 PM »
 talked with the oil reps and atf is not right for these dirt bike transmissions

Stewart, I am very curious about this.  Will you give more details?   thx
If some is good, and more is better, then too much is JUST RIGHT!  B.O.