Author Topic: Scott's steering damper opinions  (Read 6650 times)

0 Members and 1 Guest are viewing this topic.

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Scott's steering damper opinions
« on: June 12, 2006, 04:30:56 AM »
Well, after this weekend, I am going to need a steering stabilizer on my 5. I tried dialing out the high speed headshake, and it's much better since I slid the forks down into the triple tree, but it's still unacceptable. I have seen the Scott's units on bikes, but never really looked closely at the install. Is it a big job on a 5? Thanks,
                                         Rich
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Re: Scott's steering damper opinions
« Reply #1 on: June 12, 2006, 05:03:35 AM »
Piece of cake and worth every penny. The GPR just as good, comes in green and their customer service / support is second to none. I sold my Scotts before I sold the bike and when I get a replacement the green GPR is what I'm buying.
:mrgreen:

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Re: Scott's steering damper opinions
« Reply #2 on: June 12, 2006, 05:08:47 AM »
I've also had a ton of luck with my W.E.R. damper. It doesn't have a lifetime and is expensive for a damper. But I have 0 headshake right now and I like the fact that is nowhere near the handle bars.

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Re: Scott's steering damper opinions
« Reply #3 on: June 12, 2006, 05:23:52 AM »
I run a Scott's and I was amazed how well it works and I think it makes a large safety difference! I can justify anything in the name of protection my old body!:-D :-D
« Last Edit: October 30, 2006, 12:33:21 AM by alan »
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Scott's steering damper opinions
« Reply #4 on: June 12, 2006, 06:43:05 AM »
  I have a Scott's damper setup for my bike also. For me there are only 2 things that are hard on the install. #1 the price.  #2 the weld on tower. That's why mine is not installed yet. I have a friend that will tig weld it for me. I need to make a convenient time to get together and he will tig weld it for me.
  Other than the price and the welding it's easy to install. Gas tank is about the only thing you have to remove. Oh, change the handle bar mount with the Scott's mount. Plus you have to cut to length and file/grind to fit the shape where it gets welded.
  I don't like the fact that it's on top of the bar either.  That's not a good handel bar pad. Scott's has changed their line up since I bought mine.  http://www.scottsperformance.com/dampacc-form.php?Type=dirt  They have an under bar mount now. I'll post some pictures in After market parts, link is below in my signature.
Danger
KX 500 Rider

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Scott's steering damper opinions
« Reply #5 on: June 12, 2006, 07:09:59 AM »
Thanks guys,
sound like the damper is simply a "must have" accessory. Time to put another beating on my local paper boy for some extra $$ quarters.....!
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: Scott's steering damper opinions
« Reply #6 on: October 18, 2006, 06:37:26 AM »
What's the web-site for the GPR??Thanks.
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Re: Scott's steering damper opinions
« Reply #7 on: October 18, 2006, 08:57:29 AM »

Offline Spider

  • Full Member
  • ***
  • Posts: 173
Re: Scott's steering damper opinions
« Reply #8 on: October 18, 2006, 10:37:48 AM »
I love my Scotts!

Dale

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Scott's steering damper opinions
« Reply #10 on: October 29, 2006, 02:44:21 PM »
Dan said today would be a good day to tig weld my steering stabilizer tower.  I had to do some grinding and filing on the tower for the proper fit.  Dan buffed off the paint at the weld site.  10 minutes later I had my Scotts Steering Stabilizer on the bike and working.  Have to wait till tomorrow to test it.  Here are some pictures.  check out his stand he made.
Danger
KX 500 Rider

Offline FuriouSly

  • Sr. Member
  • ****
  • Posts: 388
    • the "Base Camp"
Re: Scott's steering damper opinions
« Reply #11 on: October 29, 2006, 04:15:43 PM »
Looks great Danger.  Stabs are the bomb in their domain.

I thought a little warning might be in order about the damper system if you have never used one.  They are most effective at speed (around 50 MPH and up).  From my experience, if you forget they are set at 3 or up and you are looking to make a technical/emergent turn... you might be dusting yourself off and straightening some levers.

Have fun tomorrow !  Sly



Opps sorry, its a Scott's not a GPR.  Anyway, if you set it around medium and towards hard, that's what I'm saying....
« Last Edit: October 29, 2006, 04:18:45 PM by FuriouSly »

Offline delphipro5

  • Sr. Member
  • ****
  • Posts: 262
Re: Scott's steering damper opinions
« Reply #12 on: April 05, 2011, 04:05:48 PM »
So I have a few Q's about welding the tower and I figured why start a new thread when there is a perfectly fine one right here.

SO I got my frame prepped:




And my tower all ground to shape and cut to length:




That was a pain in the butt! I wish I had better equip. to use instead of a dremel and hacksaw! :-(  it's a little screwy but it should work.


Offline delphipro5

  • Sr. Member
  • ****
  • Posts: 262
Re: Scott's steering damper opinions
« Reply #13 on: April 05, 2011, 04:10:00 PM »
had to make it 2 posts cuz this thing get's screwed up with long replies.
SO Here it sit's waiting to be welded:



I brought the hight of the tower down another 3mm from that pic. To assure NO BOTTOMING of the linkarm on the pins flats due to flex of the rubber mount handlebars. ( if you install one of these, remember that! )

NOW, my Q is this: IS this frame- cromoly steel- or -just mild steel? The scotts manual says to use just mild steel filler rod.
Now I need to figure out who or where I am having it welded.

IS THIS FRAME CROMOLY OR JUST MILD STEEL?
« Last Edit: April 05, 2011, 04:13:27 PM by delphipro5 »

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Scott's steering damper opinions
« Reply #14 on: April 05, 2011, 10:00:42 PM »
Here's how I ended up doing mine A buddy of mine who owed me a few favors welded the post for me :




What a HUGE improvement in front end stability ! If I was to only do ONE performance mod to a stock KX500. it would be to add a steering dampener !!!!



« Last Edit: April 05, 2011, 10:04:05 PM by Polar-Bus »
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart