« previous next »
Pages: [1] 2   Go Down

Author Topic: Impeller seal??  (Read 6306 times)

0 Members and 3 Guests are viewing this topic.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Impeller seal??
« on: November 21, 2018, 12:22:53 PM »
Took my baby out for it's first ride after sitting for 9 months. Ran great but now no coolant in rads and oil sight  glass over full. Hoping it's just impeller seal. Any thoughts? :-(
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #1 on: November 21, 2018, 12:36:51 PM »
Is the oil grey/white now?
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #2 on: November 21, 2018, 12:58:25 PM »
Quote from: Foxx4Beaver on November 21, 2018, 12:36:51 PM
Is the oil grey/white now?
Yep!!
It was only like a ten minute ride,  Just to make sure she was ready for the big weekend. Didn't notice till I pulled off the stand to load her up. Oil coolant mixture on the stand from vent I suppose
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #3 on: November 21, 2018, 01:08:35 PM »
Bingo!  :-)
Though until you actually pull it apart, you won't know for sure, but there's a 99.99% probability that's the problem.
Once they sit for a prolonged amount of time, they do dry out/rot, and the shaft can get rusty/pitted.
Try to fire her
up every few weeks if you think it's gunna be a while til your next outing...keep things lubricated.  :mrgreen:
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #4 on: November 21, 2018, 01:21:08 PM »
Quote from: Foxx4Beaver on November 21, 2018, 01:08:35 PM
Bingo!  :-)
Though until you actually pull it apart, you won't know for sure, but there's a 99.99% probability that's the problem.
Once they sit for a prolonged amount of time, they do dry out/rot, and the shaft can get rusty/pitted.
Try to fire her
up every few weeks if you think it's gunna be a while til your next outing...keep things lubricated.  :mrgreen:

That one of those friggin case splitting seals like the crank seals right? Man my parade just got $*!+ On
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #5 on: November 21, 2018, 01:43:53 PM »
No, it can be done without splitting the motor.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #6 on: November 21, 2018, 02:00:44 PM »
Quote from: Foxx4Beaver on November 21, 2018, 01:43:53 PM
No, it can be done without splitting the motor.
Oh that's what I'm thankful for this year.  :evil:
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #7 on: November 21, 2018, 03:53:30 PM »
Lol A-men
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #8 on: November 24, 2018, 09:42:30 PM »
So has any body used any of these oversized impellers that come with a spacer for the cover? I've seen a few different ones on eBay. From the stuff I read the impeller size doesn't matter as much as getting a tighter tolerance and smoother n larger coolant ports n channels
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline umberto

  • Administrator
  • Hero Member
  • *****
  • Posts: 2,488
  • First Ride 02-02-19
Re: Impeller seal??
« Reply #9 on: November 25, 2018, 12:13:06 PM »
Quote from: reklessj on November 24, 2018, 09:42:30 PM
So has any body used any of these oversized impellers that come with a spacer for the cover? I've seen a few different ones on eBay. From the stuff I read the impeller size doesn't matter as much as getting a tighter tolerance and smoother n larger coolant ports n channels
Sandblaster was working on some cooling stuff for the 500.  He might be the guy to ask.
Logged
Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525/2017 KX250F - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #10 on: November 25, 2018, 01:11:38 PM »
Quote from: reklessj on November 24, 2018, 09:42:30 PM
So has any body used any of these oversized impellers that come with a spacer for the cover? I've seen a few different ones on eBay. From the stuff I read the impeller size doesn't matter as much as getting a tighter tolerance and smoother n larger coolant ports n channels

If I remember correctly, Dave (Motorrad) was doing some impeller and housing mods a few years ago, Sandblaster could've been involved in it too...I think it was in the "K5 Cooling" thread.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #11 on: November 25, 2018, 02:44:33 PM »
Quote from: Foxx4Beaver on November 25, 2018, 01:11:38 PM
Quote from: reklessj on November 24, 2018, 09:42:30 PM
So has any body used any of these oversized impellers that come with a spacer for the cover? I've seen a few different ones on eBay. From the stuff I read the impeller size doesn't matter as much as getting a tighter tolerance and smoother n larger coolant ports n channels

If I remember correctly, Dave (Motorrad) was doing some impeller and housing mods a few years ago, Sandblaster could've been involved in it too...I think it was in the "K5 Cooling" thread.
Yeah I was reading it on oem-cycle  I think I get the jist of that whole theory. Although I was about to put my head through the wall when I was done. Lol too tech for me man, Dave has a tendency to do that to me. I sure do miss him being round here
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Impeller seal??
« Reply #12 on: November 25, 2018, 10:03:36 PM »
Quote from: reklessj on November 25, 2018, 02:44:33 PM
Quote from: Foxx4Beaver on November 25, 2018, 01:11:38 PM
Quote from: reklessj on November 24, 2018, 09:42:30 PM
So has any body used any of these oversized impellers that come with a spacer for the cover? I've seen a few different ones on eBay. From the stuff I read the impeller size doesn't matter as much as getting a tighter tolerance and smoother n larger coolant ports n channels

If I remember correctly, Dave (Motorrad) was doing some impeller and housing mods a few years ago, Sandblaster could've been involved in it too...I think it was in the "K5 Cooling" thread.
Yeah I was reading it on oem-cycle  I think I get the jist of that whole theory. Although I was about to put my head through the wall when I was done. Lol too tech for me man, Dave has a tendency to do that to me. I sure do miss him being round here
 

Me too, he brought a lot of knowledge to the table, and not just about bikes.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Impeller seal??
« Reply #13 on: November 26, 2018, 08:34:19 AM »
Yeah, David and I did a lot of those kinds of things.
He'd post a idea and I would see if I could get it done before him  :evil:

Anyhow, there is a company that is coming out with a KX500 impeller kit that works better then any other of the big impeller kits.
We found that some of the big impeller kits didn't cool as well as the stock impellers did  :-o

I think we all miss Motorrad to some degree...
He inspired a lot of us to do some really cool things and some really dumb ones  :lol:
But it was certainly fun  8-)
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Impeller seal??
« Reply #14 on: November 26, 2018, 06:38:25 PM »
I like that TSR setup too
Logged
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700
Pages: [1] 2   Go Up
« previous next »