trail tech temp sensor installed in head

[motovet]

I recently purchased a trail tech voyager set up for my 03 k5. It comes set up with a pipe to splice into the radiator hose for the temp reading but it really won`t fit properly with the bend in the hose. I was wondering if anyone has used the threaded 10mm temp sensor that they sell  and installed it in the bleeder screw hole on top of the head? It fits in there nice but I am wondering if it is going to block any coolant and cause it to run hotter or hurt anything else.

[1901306708]

You'll be fine. When I have some time I'm going to do the same thing

[alward25]

I have installed with no issue behind the RH radiator. That way you know what the temp of the coolant going back in the engine.

[motovet]

I had a 3 hour race this weekend on the ice and that was the first time I had a chance to really run the bike since installing the sensor. Everything worked great, I used a little Teflon tape on the threads along with the plastic washer that came with it and just lightly snugged it up. It was showing about 152 degrees so I may thy and partly cover the radiators to get temps up. What would be a good area to be at for engine temp? thinking I would like to see 200 ish.

[alward25]

above 165 would be great