I rolled her outside to take some video, and ran into some issues. The kickstarter was slipping on the ratchet, and the float bowl was stuck and fuel was running out. I'm going to bite the bullet and buy a 2017 kickstarter and see if that will work. The 2004 is right between two notches; one is too far back and hits the frame, and the other is too far forward and hits the clutch cover. I had hoped to set it too far forward and just slip it back a little bit, but it causes the ratchet to not fully release. Oh well, it was free to try it that way. Hopefully I can get the new kickstarter installed, clean the carb, adjust the rekluse clutch, and have some video next weekend.