Author Topic: Gear output 2nd 13129-1955  (Read 6508 times)

0 Members and 1 Guest are viewing this topic.

Offline Swe_K5_89

  • Sr. Member
  • ****
  • Posts: 254
  • >> KX500 -89 <<
Gear output 2nd 13129-1955
« on: February 10, 2016, 06:48:57 AM »
Hi,
Trying to find a gear 13129-1955 to my KX500-89. By it seems difficult to get.
Any ideas of where to find one?
1989 KX500
1981 YZ465
.

Offline KXDINO

  • Hero Member
  • *****
  • Posts: 630
Re: Gear output 2nd 13129-1955
« Reply #1 on: February 11, 2016, 09:03:38 PM »
Have they run out of stock on that one ?

Offline Swe_K5_89

  • Sr. Member
  • ****
  • Posts: 254
  • >> KX500 -89 <<
Re: Gear output 2nd 13129-1955
« Reply #2 on: March 04, 2016, 08:09:45 AM »
Yes, not available any more. But I did find out that you could use a set of gears from a later year. So the problem is solved. A small change in ratio, but not sure that I will notice..
1989 KX500
1981 YZ465
.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Gear output 2nd 13129-1955
« Reply #3 on: March 04, 2016, 09:17:06 AM »
are they "discontinued", or "back-ordered"?...
when I replaced my entire tranny 2 years ago, 3rd and 5th gear sets were back-ordered for about a month.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Gear output 2nd 13129-1955
« Reply #4 on: March 04, 2016, 09:33:30 AM »
BikeBandit.com has em listed as "back-ordered"...which is potentially a good thing...if they were listed as "discontinued"...then there'd be zero hope.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Gear output 2nd 13129-1955
« Reply #5 on: March 04, 2016, 10:08:04 AM »
Yeah, we ordered 3 full sets of gears last year, some took a few months to get in.
Unfortunately it's just a matter of time before they will be all gone.
Better start hording  8-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Gear output 2nd 13129-1955
« Reply #6 on: March 04, 2016, 10:17:21 AM »
Better start hording  8-)

haha...yup!.
and keep on top of the oil changes everyone!...it's the cheapest/easiest way to pro-long the inevitable.  :x
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Gear output 2nd 13129-1955
« Reply #7 on: March 04, 2016, 10:20:55 AM »
And stop banging gears, use your clutch!!!!  :roll:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Swe_K5_89

  • Sr. Member
  • ****
  • Posts: 254
  • >> KX500 -89 <<
Re: Gear output 2nd 13129-1955
« Reply #8 on: March 05, 2016, 05:23:31 AM »
Hope that this set-up will last for a while..
1989 KX500
1981 YZ465
.

Offline ddashb

  • Jr. Member
  • **
  • Posts: 31
Re: Gear output 2nd 13129-1955
« Reply #9 on: July 19, 2016, 04:23:21 PM »
ugh I'm looking for output 4th that engauges with output third, also rounded dogs but I have one coming. 13260-1021 is the kawasaki part number and using k-dealer ( I work at a Kawasaki dealer) it shows the availability as N/A which means all gone as far as I know. :,(
« Last Edit: July 19, 2016, 04:25:03 PM by ddashb »

Offline KXDINO

  • Hero Member
  • *****
  • Posts: 630
Re: Gear output 2nd 13129-1955
« Reply #10 on: July 20, 2016, 07:56:56 PM »
i have heard of guys fixing the dogs on the gears up , no choice if you cant get them anymore and you dont want to pay for a custom gear to be made , wonder what that would cost , anyone?