Author Topic: Needle ?  (Read 16070 times)

0 Members and 2 Guests are viewing this topic.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Needle ?
« on: September 29, 2015, 01:34:35 PM »
So Sir Motorrad had given me some info on my old phone before I broke it so I need a little help. I have a N82R and a N82M needle and wondering which is a leaner needle. Is there a needle chart that I couldn't find? Thanks everyone!!!
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Needle ?
« Reply #1 on: September 29, 2015, 01:35:20 PM »
the R is leaner.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #2 on: September 29, 2015, 01:37:48 PM »
Thanks Foxx your on it!!! Trying to jet this thing perfect!!!!
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Needle ?
« Reply #3 on: September 29, 2015, 02:53:37 PM »
Just for giggles, I run the R at 4500 ft with a 55P and 168M.
Clip on the 2nd position.
I've only ran it with those settings one time and seemed ok.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #4 on: September 29, 2015, 03:07:21 PM »
Thanks Blaster, I'm at about 3000'  60P, 170M. Going to put the N82R back in in center position and go from there. I do have a 58P I might try But one thing at a time
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Needle ?
« Reply #5 on: September 29, 2015, 03:49:09 PM »
here im at a little over 5200 feet. i was running the r on the second clip position but i have a p that honestly runs cleaner than the r in the second position with the 52 pilot and 168 main. but really between the p and the r you really cant tell a whole lot of difference. maybe in the initial warm upo when i start moving the p seems to cough the phlegm out pretty quick and the r takes a second longer./ seems like it should go the other way but stranger things have happened. i wish i could feel even somewhat confident that i knew how to read those charts that pcmotorsports and companies that resell needles with their re manufactured numbers on em so i could get a few other needles or a replacement when the time should come./
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Needle ?
« Reply #6 on: September 29, 2015, 04:09:09 PM »
I normally ride at 0-1000 ft so I'm still experimenting when I ride the high desert.
So far my set up is the best I have tried but I really need to do it right, then go ride....
But when I get there I just want to ride  :roll:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #7 on: September 29, 2015, 04:43:52 PM »
Well I'm laid off for a week or two and about 5 gallons of VP to mix  so I will fiddle around with it a bit. Still a bit warm for me but I will tough it out. :lol:
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Motorrad

  • Guest
Re: Needle ?
« Reply #8 on: September 30, 2015, 01:58:52 AM »
Well I'm laid off for a week or two and about 5 gallons of VP to mix  so I will fiddle around with it a bit. Still a bit warm for me but I will tough it out. :lol:

You should still have my number?

You trying to get rid of the rich spots on your carb?

Ive got some custom cut needles here if you need to try them.  I had them cut for my bike. they are much leaner than stock.


Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #9 on: September 30, 2015, 02:53:41 AM »
Well I'm laid off for a week or two and about 5 gallons of VP to mix  so I will fiddle around with it a bit. Still a bit warm for me but I will tough it out. :lol:

You should still have my number?

You trying to get rid of the rich spots on your carb?

Ive got some custom cut needles here if you need to try them.  I had them cut for my bike. they are much leaner than stock.


I just found your # last night in my Tom Morgan file I have been air headed lately!! YEAH that fat spot is gonna kill me never sure when it's gonna clean out n rip my arms off, riding so tense it just wears me out. I am gonna try this R out again I think that will do it but I may take you up on that. Thanks bro
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Motorrad

  • Guest
Re: Needle ?
« Reply #10 on: September 30, 2015, 02:55:41 AM »
Well I'm laid off for a week or two and about 5 gallons of VP to mix  so I will fiddle around with it a bit. Still a bit warm for me but I will tough it out. :lol:

You should still have my number?

You trying to get rid of the rich spots on your carb?

Ive got some custom cut needles here if you need to try them.  I had them cut for my bike. they are much leaner than stock.


I just found your # last night in my Tom Morgan file I have been air headed lately!! YEAH that fat spot is gonna kill me never sure when it's gonna clean out n rip my arms off, riding so tense it just wears me out. I am gonna try this R out again I think that will do it but I may take you up on that. Thanks bro

refresh my memory.  where in the throttle range was the rich spot?


Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #11 on: September 30, 2015, 03:48:23 AM »
Well I'm laid off for a week or two and about 5 gallons of VP to mix  so I will fiddle around with it a bit. Still a bit warm for me but I will tough it out. :lol:

You should still have my number?

You trying to get rid of the rich spots on your carb?

Ive got some custom cut needles here if you need to try them.  I had them cut for my bike. they are much leaner than stock.


I just found your # last night in my Tom Morgan file I have been air headed lately!! YEAH that fat spot is gonna kill me never sure when it's gonna clean out n rip my arms off, riding so tense it just wears me out. I am gonna try this R out again I think that will do it but I may take you up on that. Thanks bro

refresh my memory.  where in the throttle range was the rich spot?


off the bottom to about 1/3 open
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Motorrad

  • Guest
Re: Needle ?
« Reply #12 on: September 30, 2015, 04:20:00 AM »



Motorrad

  • Guest
Re: Needle ?
« Reply #13 on: September 30, 2015, 04:21:17 AM »
Was that a new carb?   I've chased many k5 that just flat out had a worn out NEEDLE jet. (Tube the needle rides in).   Worn like a football... So it doesn't regulate correctly

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Needle ?
« Reply #14 on: September 30, 2015, 04:43:44 AM »
Was that a new carb?   I've chased many k5 that just flat out had a worn out NEEDLE jet. (Tube the needle rides in).   Worn like a football... So it doesn't regulate correctly
No it was not new, original I believe.
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700