« previous next »
Pages: [1]   Go Down

Author Topic: Need a kick start lever  (Read 5849 times)

0 Members and 2 Guests are viewing this topic.

Offline dinkyguitar

  • Full Member
  • ***
  • Posts: 243
Need a kick start lever
« on: November 06, 2014, 12:52:52 AM »
Hi All,

Does anyone know what other year kick start lever assembly will fit an 87 KX 250?

The aluminum kick lever after 27 years has a bit a play...

dinky,

« Last Edit: November 06, 2014, 02:16:52 AM by dinkyguitar »
Logged

Motorrad

  • Guest
Re: Need a lick start lever
« Reply #1 on: November 06, 2014, 01:00:49 AM »
Lick starting is very unsanitary.
Logged

Offline dinkyguitar

  • Full Member
  • ***
  • Posts: 243
Re: Need a lick start lever
« Reply #2 on: November 06, 2014, 02:17:44 AM »
Quote from: Motorrad on November 06, 2014, 01:00:49 AM
Lick starting is very unsanitary.

oopppss.....very unsanitary  :-D

correction made....
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Need a kick start lever
« Reply #3 on: November 06, 2014, 02:42:43 AM »
By parts numbers the lever, boss, and shaft are all single year fitment for 87 only .... It's hard to believe that is really the case..
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dinkyguitar

  • Full Member
  • ***
  • Posts: 243
Re: Need a kick start lever
« Reply #4 on: November 06, 2014, 02:48:33 AM »
I'm wondering if the shaft splines are the same though out the years.....but the boss is slightly different.

I checked out the kick boss on other KX 250 years and all they "seems" to be the same diameter...

dinky,
Logged

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: Need a kick start lever
« Reply #5 on: November 06, 2014, 04:54:24 AM »
Quote from: dinkyguitar on November 06, 2014, 02:48:33 AM
I'm wondering if the shaft splines are the same though out the years.....but the boss is slightly different.

I checked out the kick boss on other KX 250 years and all they "seems" to be the same diameter...

dinky,


the kx250 kickstart shafts are all similar 82-2008 ... same splines, and the change from the nut to a bolt for fixing the lever ... 

i have an brandnew 2002 oem kickstartlever on my 87 kx250 and i had it also on my 83 kx250 for a short time.  2003-2008 has a diferent bending,because of the lower frame, but will also work well to the older years..  8-)
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline dinkyguitar

  • Full Member
  • ***
  • Posts: 243
Re: Need a kick start lever
« Reply #6 on: November 06, 2014, 06:49:20 AM »
Thanks motopunk!

Exactly what I was looking for...

dinky,
Logged

Offline zz3gmc

  • Full Member
  • ***
  • Posts: 178
Re: Need a kick start lever
« Reply #7 on: November 06, 2014, 08:43:11 AM »
My 86 is sloppy also. I do have a herd of 03-07 KX250s in the garage so I might have to borrow one off of one of them! Just not my wifes!
Logged

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: Need a kick start lever
« Reply #8 on: November 06, 2014, 11:59:07 AM »
Quote from: dinkyguitar on November 06, 2014, 06:49:20 AM
Thanks motopunk!

Exactly what I was looking for...

dinky,


 8-)... thats sometimes learning by doing and comparing parts, that i have laying around from several years...  
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Motorrad

  • Guest
Re: Need a kick start lever
« Reply #9 on: November 06, 2014, 01:22:47 PM »
My wife says she wishes my tongue was strong enough to lick start a k5.    Ka zing. 
Logged

Offline dinkyguitar

  • Full Member
  • ***
  • Posts: 243
Re: Need a kick start lever
« Reply #10 on: January 09, 2015, 02:09:34 PM »
So I finally bought a kick start lever to replace mine using all your advice.

And if anyone is interested or wondering, the one I order was for a 94-01 KX250, and it fit my 87 KX250 perfectly.

thanks again everyone,
dinky,
Logged
Pages: [1]   Go Up
« previous next »