« previous next »
Pages: [1]   Go Down

Author Topic: 1990 Frame Conversion  (Read 3169 times)

0 Members and 4 Guests are viewing this topic.

Offline thooker515

  • Newbie
  • *
  • Posts: 6
1990 Frame Conversion
« on: November 03, 2014, 02:23:03 PM »
I have a 1989 KX500 that needs a new frame, I have a brand new 2000 KX500 Frame from a perimeter frame conversion.  Does anyone know of any issues I might face from swapping up to the 2000 frame (besides the State title issues)?  From what I can find the frames only changed colors between 1990-2004.
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1990 Frame Conversion
« Reply #1 on: November 03, 2014, 05:12:20 PM »
Off the top of my head you shouldn't have any trouble as long as you are using all the parts off the 89.
Some of the parts don't play well together when you start mixing them up, but a fair amount do interchange.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 1990 Frame Conversion
« Reply #2 on: November 04, 2014, 05:34:19 AM »
Quote from: sandblaster on November 03, 2014, 05:12:20 PM
Off the top of my head you shouldn't have any trouble as long as you are using all the parts off the 89.
Some of the parts don't play well together when you start mixing them up, but a fair amount do interchange.


the k5 is unchanged between 89-2004 except the newer brake-calipers , forks and different colours on seat and tank... there is no problem by interchanging the frames ... 

at the moment i am looking for an cheap 87, 88 or 89 frame in any condition, for a new secret project ...   8-)
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1990 Frame Conversion
« Reply #3 on: November 04, 2014, 12:08:08 PM »
Gotta watch the swing arm that you use the correct rear brake caliper mount.
If your using all 89 except for the frame you should be good to go.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline jcm3

  • Full Member
  • ***
  • Posts: 115
Re: 1990 Frame Conversion
« Reply #4 on: November 05, 2014, 03:54:42 AM »
Quote from: thooker515 on November 03, 2014, 02:23:03 PM
I have a 1989 KX500 that needs a new frame, I have a brand new 2000 KX500 Frame from a perimeter frame conversion.  Does anyone know of any issues I might face from swapping up to the 2000 frame (besides the State title issues)?  From what I can find the frames only changed colors between 1990-2004.

Since the KX500 did not come with a perimeter frame, is this a KX250 frame, by chance?

Logged
2000 KX500 - Tom Morgan motor, RG3 suspension, EBC oversized front brake rotor - lots-o-fun
Pages: [1]   Go Up
« previous next »