Author Topic: Do they make frame protectors for the KX500?  (Read 5016 times)

0 Members and 1 Guest are viewing this topic.

Offline jcm3

  • Full Member
  • ***
  • Posts: 115
Do they make frame protectors for the KX500?
« on: July 11, 2014, 03:14:13 AM »
I've been searching for something like this, but can't seem to find anyone that makes them for a KX500.  I'm not surprised, given that the bike is no longer made and hasn't changed much since the 80's.

I was trying to find something like the pic below.

If not, would it look cheese to use Rhino Lining paint, or something similar, if it was taped off and done cleanly?  I don't have the patience to stay on top of it and keep touching it up, but it would be nice to keep it looking cleaner.

I have seen the metal or aluminum ones, but was hoping for the black plastic type.

Thanks for any info.


2000 KX500 - Tom Morgan motor, RG3 suspension, EBC oversized front brake rotor - lots-o-fun

Offline cmotodad

  • Full Member
  • ***
  • Posts: 217
Re: Do they make frame protectors for the KX500?
« Reply #1 on: July 11, 2014, 03:20:34 AM »
Cut skateboard grip tape and place it in the wear points. oops
« Last Edit: July 11, 2014, 03:37:34 AM by cmotodad »

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Do they make frame protectors for the KX500?
« Reply #2 on: July 11, 2014, 03:21:59 AM »
I use Works Connection frame protectors.
« Last Edit: July 11, 2014, 03:54:45 AM by Danger4u2 »
KX 500 Rider

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Do they make frame protectors for the KX500?
« Reply #3 on: July 11, 2014, 03:39:52 AM »
I can still buy them new for the KX500 like this



If I can still get them I'm sure they must be available on eBay... yep there are several pairs there:
http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=works+connection+frame+guards+kx500&_sop=15
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline jcm3

  • Full Member
  • ***
  • Posts: 115
Re: Do they make frame protectors for the KX500?
« Reply #4 on: July 11, 2014, 03:49:42 AM »
Thanks, guys.  I may try the skateboard tape, or may even try a Rhino Lining type of product. 

Sandblaster, I don't like the look of the metal or aluminum ones as much, but they may work if the other options don't look as good as I hope they will.  Thanks for the link.   :-D 
2000 KX500 - Tom Morgan motor, RG3 suspension, EBC oversized front brake rotor - lots-o-fun

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Do they make frame protectors for the KX500?
« Reply #5 on: July 11, 2014, 06:14:14 AM »
Thanks, guys.  I may try the skateboard tape, or may even try a Rhino Lining type of product. 

I use a generous amount of skateboard tape also, and Works Connection guards...



 
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline jcm3

  • Full Member
  • ***
  • Posts: 115
Re: Do they make frame protectors for the KX500?
« Reply #6 on: July 11, 2014, 06:19:56 AM »

I use a generous amount of skateboard tape also, and Works Connection guards...

Good combo.  Love the black wheels.  I seriously want some, but can't be spending the money on them right now.  I'm blowing way too much money on the Tom Morgan rebuild and all of the extra crap that I'm doing while it is down.  the wife is going to make me start sleeping in the RV soon if she sees the bills.
2000 KX500 - Tom Morgan motor, RG3 suspension, EBC oversized front brake rotor - lots-o-fun

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Do they make frame protectors for the KX500?
« Reply #7 on: July 11, 2014, 06:23:01 AM »
the wife is going to make me start sleeping in the RV soon if she sees the bills.

ha...I would honor that!...all the more reason to call up the local escort services :wink:
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Do they make frame protectors for the KX500?
« Reply #8 on: July 11, 2014, 06:31:12 AM »
$550 +shipping for a set of wheels just like those from Warp 9 :-D  Just sayin'
"Let there be light"

Offline jcm3

  • Full Member
  • ***
  • Posts: 115
Re: Do they make frame protectors for the KX500?
« Reply #9 on: July 11, 2014, 07:33:24 AM »
ha...I would honor that!...all the more reason to call up the local escort services :wink:

LOL

$550 +shipping for a set of wheels just like those from Warp 9 :-D  Just sayin'

Yep, gonna have to do it within a year or so. 
2000 KX500 - Tom Morgan motor, RG3 suspension, EBC oversized front brake rotor - lots-o-fun

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Do they make frame protectors for the KX500?
« Reply #10 on: July 11, 2014, 07:42:54 AM »
'merica
"Let there be light"