« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: KX500B1 Rebuild Project  (Read 34549 times)

0 Members and 8 Guests are viewing this topic.

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
KX500B1 Rebuild Project
« on: April 29, 2014, 05:53:46 AM »
As picked up, January 2014:


Initial tear down, February 2014: Shock reservoir bracket broken, forks seals blown, shock seal blown, engine TBD...



Frame cleaning pre-repairs and finishing:


Engine: Bottom end needs crank rebuild + bearings/seals, idler gear, clutch plates, trans bearings, new  washers and clips, and the left side case is cracked. Boo! Top end needs cylinder plating and piston...at least there are no power valve parts to deal with!


 
« Last Edit: June 22, 2015, 04:03:39 PM by motojason »
Logged
Motorcycles are my favorite people...

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KX500B1 Rebuild Project
« Reply #1 on: April 29, 2014, 07:40:59 AM »
some odds and ends here if you haven't already seen em...

http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=1985+nos+kx500&rt=nc
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #2 on: April 29, 2014, 07:50:41 AM »
Oooo, I love NOS!!!
Logged
Motorcycles are my favorite people...

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #3 on: May 13, 2014, 01:51:30 AM »
Parts arriving: Frame back from getting repaired, sand blasted, and powder coated. New Hi-Flite seat, rebuilt crank, NOS idle gear!!!... and lots of other goodies.




Still need to get rear shock done and the cases repaired. Making  progress.

Won't be ready for the Unadilla Rewind this month, but hoping to have it done before September.
Logged
Motorcycles are my favorite people...

Offline Goat

  • Hero Member
  • *****
  • Posts: 785
  • Ride it like you stole it!
Re: KX500B1 Rebuild Project
« Reply #4 on: May 13, 2014, 05:08:49 AM »
Where did you pick that up from? Looks like the one I fixed up and sold 6 years ago. I think the guy I sold it to was either in Big Rapids or Battle Creek can't remember.
Logged
Quote from: Danger4u2 on June 17, 2010, 01:36:16 AM
It's hard to keep a drivers license riding a 2 stroke dirt bike on the street.  If you drive within the law they are VERY boring.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KX500B1 Rebuild Project
« Reply #5 on: May 13, 2014, 08:33:12 AM »
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #6 on: May 13, 2014, 09:16:17 AM »
Quote from: Goat on May 13, 2014, 05:08:49 AM
Where did you pick that up from? Looks like the one I fixed up and sold 6 years ago. I think the guy I sold it to was either in Big Rapids or Battle Creek can't remember.

Got it in Somonauk, Ill. Purchased from second owner who got it from a friend that bought it new from Tuf Racing in Dekalb, Ill. This one had never been fixed up in its life. Think it still had the original front tire! Was completely stock except for a PSI pipe and in pretty poor shape mechanically, completely worn out.
« Last Edit: May 13, 2014, 09:20:52 AM by motojason »
Logged
Motorcycles are my favorite people...

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #7 on: May 13, 2014, 09:30:53 AM »
Quote from: Foxx4Beaver on May 13, 2014, 08:33:12 AM
Quote from: motojason on May 13, 2014, 01:51:30 AM


sweet seat!!

Thanks! I dig Hi-Flite. I was happy to discover they were still in business. Had one of their safety seats on my 83 125 back in the day and now have them on all of the bikes I have rebuilt in the last few years.
« Last Edit: January 24, 2015, 03:38:59 AM by motojason »
Logged
Motorcycles are my favorite people...

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KX500B1 Rebuild Project
« Reply #8 on: May 13, 2014, 09:58:53 AM »
Quote from: motojason on May 13, 2014, 09:30:53 AM
Quote from: Foxx4Beaver on May 13, 2014, 08:33:12 AM
Quote from: motojason on May 13, 2014, 01:51:30 AM
sweet seat!!
I was happy to discover they were still in business.

good to know!...I haven't seen or heard of Hi-Flite in years.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #9 on: January 09, 2015, 03:47:21 AM »
After a long break the project is back on track. Got some of the more difficult to source parts. Have a new kick start idler gear. Shock is at Race Tech. Cylinder plating done and found an original piston. Cases repaired and the motor is ready for assembly. Will post some progress photos soon! 
Logged
Motorcycles are my favorite people...

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KX500B1 Rebuild Project
« Reply #10 on: January 09, 2015, 03:49:29 AM »
awesome!...I had forgotten about this project...looking forward to seeing the progress!
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline jethrobolas

  • Jr. Member
  • **
  • Posts: 10
Re: KX500B1 Rebuild Project
« Reply #11 on: January 14, 2015, 01:20:26 PM »
Hey moto, that guy you bought the bike from, did he live at lake holiday? Farm land behind his house?
Logged

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #12 on: January 16, 2015, 08:05:42 AM »
Quote from: jethrobolas on January 14, 2015, 01:20:26 PM
Hey moto, that guy you bought the bike from, did he live at lake holiday? Farm land behind his house?

Yup, that is correct as I recall. It was an ebay purchase, but I picked it up myself. Why?
Logged
Motorcycles are my favorite people...

Offline motojason

  • Full Member
  • ***
  • Posts: 91
  • Two arms, two legs, two wheels, perfection!
Re: KX500B1 Rebuild Project
« Reply #13 on: January 24, 2015, 03:38:16 AM »
Quote from: Foxx4Beaver on January 09, 2015, 03:49:29 AM
awesome!...I had forgotten about this project...looking forward to seeing the progress!



Just back from Race Tech!  



OEM NOS!
« Last Edit: January 24, 2015, 03:42:33 AM by motojason »
Logged
Motorcycles are my favorite people...

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500B1 Rebuild Project
« Reply #14 on: January 24, 2015, 03:46:26 AM »
Those parts are lookin good.
What all did you have Race Tech do for you?
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
Pages: [1] 2 3 4   Go Up
« previous next »