« previous next »
Pages: [1]   Go Down

Author Topic: 1989 KX125 footpegs?  (Read 2430 times)

0 Members and 3 Guests are viewing this topic.

Offline queen of spodes

  • Sr. Member
  • ****
  • Posts: 287
1989 KX125 footpegs?
« on: April 28, 2014, 01:07:01 AM »
Where can I get some new '89 KX125 footpegs?   
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 1989 KX125 footpegs?
« Reply #1 on: April 28, 2014, 02:57:13 AM »
Rocky Mountain lists a couple of options for OEM pegs(or new #'s replacing old #'s)...better off calling to explain what you want...or call your local Kawie dealer...they're only $32. a piece.
Either way, they are in stock.
« Last Edit: April 28, 2014, 04:28:13 AM by Foxx4Beaver »
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline queen of spodes

  • Sr. Member
  • ****
  • Posts: 287
Re: 1989 KX125 footpegs?
« Reply #2 on: April 30, 2014, 10:56:37 AM »
Ordered some OEM replacements which apparently are the same as the 2005 KDX220R, and the KX500.  Also got new pins & springs.
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 1989 KX125 footpegs?
« Reply #3 on: April 30, 2014, 11:00:31 AM »
cool, good to know the compatibilities between models and years....I love having new pegs, springs, and pins...so tight and rattle free.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline queen of spodes

  • Sr. Member
  • ****
  • Posts: 287
Re: 1989 KX125 footpegs?
« Reply #4 on: April 30, 2014, 02:26:46 PM »
Once I get the pegs and pins in, I'm taking the frame up to a machine shop so they can refurbish the right side peg mount.  I have a NOS left side mount so that side is golden.  The shop will weld on a little material onto the existing tabs, plus probably weld a little around the pin hole in both tabs.. then drill it back out and file everything down to fit the new OEM pegs. 

Wish I had a shop that could soda blast parts local to me.  A powder coating place I use wants to glass bead the cases, but I'm not sure I want that look.  I hear soda blasting is the way to go. 
Logged
Pages: [1]   Go Up
« previous next »