Hey everybody...I was riding thru a creek today and berried the front tire in mud and went over...sucked water down in the engine through the air box. Exhaust and gas tank were not submerged. I thought for a sec the bike just stalled out but after getting out of the water I realized it had water down in the case. The oil was all milky. Soooooo, I got a tow back to the truck took out the air filter and sure enough it was soaked. Went home drained the oil, ran a quart of oil thru it. Pulled off the gas tank and spark plug. Water was down in the cylinder so I put oil back in it, kicked it over and spit all (or most) of the water out. Put a little wd40 down there and reinstalled everything. Kicked it over and it fired up after about 4 kicks. It was smoking a little out of the tail pipe and started smoking out of the oil filler with the cap on. I ran it for about 30 seconds and turned it off. The oil is milky again which I expected so I'm in the process of flushing with more oil again. I haven't changed the oil filter yet as all the shops are closed but will be doing that. Anyone else go through this? Any suggestions as I don't want to screw up my bike. Thanks Justin
