« previous next »
Pages: 1 ... 15 16 [17] 18 19 ... 25   Go Down

Author Topic: 2 piece clutch cover  (Read 155984 times)

0 Members and 15 Guests are viewing this topic.

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #240 on: February 21, 2014, 07:34:02 PM »
without little fails is developing solutions much to easy...  :wink:

looks great ..  :-D

 ... that gives me a lot ideas with the root that i still want to go on my own projekt.. but now is time for top secret till i find the time and can work on it...  :wink:
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline Dutch-K5 Fan

  • Hero Member
  • *****
  • Posts: 759
Re: 2 piece clutch cover
« Reply #241 on: February 23, 2014, 08:26:10 AM »
Tonight I've been searching the net, this site and mine computer for side covers of 250's and 500's.

I think the "250" cover of Liles kx500sr is a special 500 cover.
The upper oil plug is in a angle and a bit more to the back.
With a 500 the waterpump and coverner are at a angle, 250 almost straigth down inline.


With Sandblasters option we AF guys could weld the stock filler plug hole for more clearence for the exhaust.
Looks like you gave me some work to do Sandblaster :mrgreen:

Dutchie
Logged
Proud owner of a KX500AF

Offline kranker1450

  • Jr. Member
  • **
  • Posts: 49
Re: 2 piece clutch cover
« Reply #242 on: February 23, 2014, 01:30:37 PM »
I want one of these covers!!!!!!
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #243 on: February 23, 2014, 04:24:17 PM »
As soon as we get the initial adapters back and we work out a good method for doing everything and we will make these available.
Eventually I can see making our own customized covers but still using the KX450F template so that you can run either... With punisher skulls, talk to the pipe, and lexan windows, ect
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline climber05

  • Full Member
  • ***
  • Posts: 57
Re: 2 piece clutch cover
« Reply #244 on: February 23, 2014, 06:10:44 PM »
This is the tits
Logged
2strokes gets me off

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #245 on: February 23, 2014, 06:42:38 PM »
Quote from: Dutch-K5 Fan on February 23, 2014, 08:26:10 AM
Tonight I've been searching the net, this site and mine computer for side covers of 250's and 500's.

I think the "250" cover of Liles kx500sr is a special 500 cover.
The upper oil plug is in a angle and a bit more to the back.
With a 500 the waterpump and coverner are at a angle, 250 almost straigth down inline.


With Sandblasters option we AF guys could weld the stock filler plug hole for more clearence for the exhaust.
Looks like you gave me some work to do Sandblaster :mrgreen:

Dutchie


thats what i tried to say..  :wink:  ...its a full gp-factory-bike. it seems that this engine is next step of evolution, that never came to production.
it looks for me that it use the basket like the later 250´s for an smaller engine. waterpump is also later 250 (92-2004)..  the factory has much more possibilities to do special engine parts , like we can dream of...  :wink:
but we can look at it for inspiring our mind...  :-)

the single pic from the first post here:


here is a view to kurt nicolls 88 kx500sr ...  if you look good, youll see that it use the newer kx500 engine with a very similar outer cover like the 88/89 kx250´s
and that is, what i want to have at least...

http://www.mxclassicracing.com/images/kawasakikx500sr88011_579.jpg

and kurt nicolls 87 kx500 sr full factory bike to show the cover on the older engine
« Last Edit: February 23, 2014, 06:49:42 PM by motopunk »
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #246 on: February 24, 2014, 03:42:32 AM »
Those look great.
I double dog dare you to make one  :-D
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #247 on: February 24, 2014, 05:13:10 AM »
Quote from: sandblaster on February 24, 2014, 03:42:32 AM
Those look great.
I double dog dare you to make one  :-D
 

we´ll see ...  :-D ... first i have to do projects with more priority ...
just caught this one on ebay. a very rare brand new ´86 kx500 cylinder head ..discontinued by kawasaki since long long years...
i say the deal of the year ...  8-)


now i have the option to use my k5-engine also in the 87-frame.
next thing is to find an good used 88/89 inner and outer clutch cover, when i have my bikes ready for the new season . its like finding a needle in a hay-barn ... but anywhere out there is the one, that i´m looking for. i feel it  :-D
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #248 on: February 24, 2014, 11:09:50 AM »
Quote from: motopunk on February 24, 2014, 05:13:10 AM
its like finding a needle in a hay-barn ... but anywhere out there is the one, that i´m looking for. i feel it  :-D

Just use a giant magnet or your x-ray vision... You'll find one  :lol:
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline tobys 2 strokes

  • Full Member
  • ***
  • Posts: 175
  • My #2 son
Re: 2 piece clutch cover
« Reply #249 on: February 25, 2014, 01:28:36 AM »
next thing is to find an good used 88/89 inner and outer clutch cover, when i have my bikes ready for the new season . its like finding a needle in a hay-barn ... but anywhere out there is the one, that i´m looking for. i feel it  


if you wernt on the other side of our globe I would donate one to you. I have a fairly decant one I was saving to make one with, but have never gotten around to it but now am waiting for these to be on the market instead.

or this one looks better than mine
http://www.ebay.com/itm/Kx-250-clutch-outer-case-cover-and-water-pump-assembly-Fits-88-89-kx-250-/231166987957?pt=Motorcycles_Parts_Accessories&hash=item35d2a04eb5&vxp=mtr#ht_44wt_1022
« Last Edit: February 25, 2014, 01:51:27 AM by tobys 2 strokes »
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #250 on: February 25, 2014, 04:47:31 AM »
I'd grab that one if I needed it.
That's a good buy.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #251 on: February 25, 2014, 05:33:53 PM »
Quote from: sandblaster on February 24, 2014, 11:09:50 AM
Quote from: motopunk on February 24, 2014, 05:13:10 AM
its like finding a needle in a hay-barn ... but anywhere out there is the one, that i´m looking for. i feel it  :-D

Just use a giant magnet or your x-ray vision... You'll find one  :lol:


aluminium is not magnetic...  :lol: 

Quote from: tobys 2 strokes on February 25, 2014, 01:28:36 AM
next thing is to find an good used 88/89 inner and outer clutch cover, when i have my bikes ready for the new season . its like finding a needle in a hay-barn ... but anywhere out there is the one, that i´m looking for. i feel it 


if you wernt on the other side of our globe I would donate one to you. I have a fairly decant one I was saving to make one with, but have never gotten around to it but now am waiting for these to be on the market instead.

or this one looks better than mine
http://www.ebay.com/itm/Kx-250-clutch-outer-case-cover-and-water-pump-assembly-Fits-88-89-kx-250-/231166987957?pt=Motorcycles_Parts_Accessories&hash=item35d2a04eb5&vxp=mtr#ht_44wt_1022

  the cover looks real good. ...  but like you said its half around the globe and i have to watch out, that i´m not running out of my little amount of money for my other projects, when i buy parts all over the world for expensive shipping and customs clearance costs. usa was always the bigger market for bikes and parts as germany and europe and so it is always a little pokergame...  :wink: 

toby .. would you shoot me a pm with a pic of yours?? 
Logged
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline Snarf

  • Newbie
  • *
  • Posts: 2
Re: 2 piece clutch cover
« Reply #252 on: February 27, 2014, 02:28:43 AM »
OK Sandblaster... let me me know where to send my parts and check!  lol! that looks AWESOME!!

WOW!
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #253 on: March 06, 2014, 01:09:30 PM »
Made a little more progress today making a weld fixture to keep the adapter from warping during weld.







Next I'll have my buddy plasma cut the ID and trim up the OD.
Then I'll have him surface grind the side that sits against the adapter  8-)
« Last Edit: March 06, 2014, 01:12:00 PM by sandblaster »
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline cmotodad

  • Full Member
  • ***
  • Posts: 217
Re: 2 piece clutch cover
« Reply #254 on: March 06, 2014, 05:34:05 PM »
When I did my 2 piece, I just went for it. Welded it,ground it, cleaned it and installed it. No warpage or leaks. Seems like there is enough radiused edges to keep it flat.
Logged
Pages: 1 ... 15 16 [17] 18 19 ... 25   Go Up
« previous next »