KX250AF Radiators

[MarcG469]

Since there is no thread for a 250AF I will post this here. If it has been asked and answered I apologize. I am looking for a bolt on solution for my 06' KX250AF radiators. Since I bought this bike used I am discovering things as I go. What I would like, ultimately, is a set of Fluidynes. I had them on my 250F and thought they were amazing. So is there a bolt on radiator solution for this project?

Thanks
Marc

[stevea100m]

im using 02 cr250 oversized radiators the only thing i have to change is the water outlet on the right side so it doesnt hit the cylinder

[Reddy]

I'm using CR rads as well, again moving the bottom hose location on the right hand size.

Just need the bottom lugs extending on the frame as well.

[MarcG469]

im using 02 cr250 oversized radiators the only thing i have to change is the water outlet on the right side so it doesnt hit the cylinder

Do the stock 2t rad hoses work with these?

[don46]

marco,

I used a set of 02 250 2t radiators, I only had to add a mount to the frame.

[MarcG469]

marco,

I used a set of 02 250 2t radiators, I only had to add a mount to the frame.

KX or CR?

[Reddy]

Here is my rad i've altered.  After 2 years I am now fabricating full mounts.  They have been quite safe on little brackets, but seeing as im keeping her, its time to make these little things permanent.

[stevea100m]

I retract my post from before about using 02 honda radiators. I spent 4 days trying to mock them to the frame and had one clearance issue after another. After fighting with it today i grabbed a radiator off of my 03 kx250. This will work from what i can tell alot easier than the honda radiator. The only modifications i will have to make is moving the inboard water connector at the bottom of the radiator to the back of the tank.

[don46]

marco,

I used a set of 02 250 2t radiators, I only had to add a mount to the frame.

KX or CR?

sorry KX, i don't own anything but Kawasaki with the exception of one POS chinese pit bike

[MarcG469]

marco,

I used a set of 02 250 2t radiators, I only had to add a mount to the frame.

KX or CR?

sorry KX, i don't own anything but Kawasaki with the exception of one POS chinese pit bike

Don how did you get the cross overs to work. Is there any way you could post a pic?

[stevea100m]

the upper cross overs look like they will go straight through but the lowers youll prolly have to have cut off and welded up then have a radiator shop put 90 degree bend tubes on the back side of the radiators