« previous next »
Pages: [1]   Go Down

Author Topic: magneto pick up  (Read 2995 times)

0 Members and 1 Guest are viewing this topic.

Offline bruuuuup

  • Jr. Member
  • **
  • Posts: 39
magneto pick up
« on: July 29, 2010, 12:36:12 PM »
I bought a 98 kx125 motor in a shifter kart and the magneto pick up screws came loose and looks like it hit the flywheel and chiped the magnet, so I re-ajusted  it to the right gap and now the kart breaks up all the at WOT all the time, the plug seems to have good spark when I check it, but who knows when its spinning really fast, could the magnet be the problem?
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: magneto pick up
« Reply #1 on: July 29, 2010, 01:12:13 PM »
 you may want to do a compression test on it.
 
            http://www.youtube.com/watch?v=SdjAw0IhZS4&feature=related
« Last Edit: July 29, 2010, 01:20:27 PM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: magneto pick up
« Reply #2 on: July 29, 2010, 02:31:08 PM »
Is there an emoticon for a forehead slap! :|
    Yep, things are getting back to normal...
 \o/

  Bruuup,  BDI is messing around, I'll look for some ways to check that stuff, I'm not sure if I have info on a '98.
I do however have a manual another member sent me. KX 125 & 250 M1 & M2  '03 & '04 ,  shoot me a note at Croft_RW@yahoo.com
  I'll send it, there is alot of good info even if the specs may be different.

And starting here for '82 to '91
  http://s69.photobucket.com/albums/i75/Friar-Tuck/service%20repair%20maitenance/?action=view&current=ElectricalSystem13-4.jpg#!oZZ5QQcurrentZZhttp%3A%2F%2Fs69.photobucket.com%2Falbums%2Fi75%2FFriar-Tuck%2Fservice%2520repair%2520maitenance%2F%3Faction%3Dview%26current%3DElectricalSystem13-4.jpg%26

  Tuck\o/ 
« Last Edit: July 29, 2010, 02:56:58 PM by Friar-Tuck »
Logged
"The Truth Has No Agenda"

Offline bruuuuup

  • Jr. Member
  • **
  • Posts: 39
Re: magneto pick up
« Reply #3 on: July 29, 2010, 03:06:26 PM »
HAHAHAHA nice bdi the motor is fresh though :-D
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: magneto pick up
« Reply #4 on: July 29, 2010, 04:54:37 PM »
One thing I really do suggest is that you replace the flywheel. I have seen them come appart after they make contact with the pulse coil or stator coil. I had one that had only made slight contact and then completely exploded and destroyed the stator and all behind the flywheel. It may very well be the pulse coil is messed up causing the prob. Or the magnets may be chipped in a way as to shorten the pulse signal to the cdi. If that's the case I would think the engine would run worse at high rpm do to the spark duration being to short. Pictures would be of great help.
« Last Edit: July 29, 2010, 05:52:56 PM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: magneto pick up
« Reply #5 on: July 29, 2010, 05:42:36 PM »
what is the gap at the pick up coil to flywheel trigger.
Logged

Offline bruuuuup

  • Jr. Member
  • **
  • Posts: 39
Re: magneto pick up
« Reply #6 on: August 02, 2010, 10:33:10 AM »
Ya that was the problem stupid magnet was toast had to buy a whole new stator.
Logged
Pages: [1]   Go Up
« previous next »