Author Topic: Another Project!!  (Read 11252 times)

0 Members and 1 Guest are viewing this topic.

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #15 on: April 21, 2009, 11:04:24 AM »
Now i can POST my pics :-D!!!

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #16 on: April 29, 2009, 12:12:26 PM »
UPDATE!!!! i started on my 500af this evening, have the engine in the frame. I cut out the old motor mounts, and the down tube, going to start building my mounts tomarrow!!! will keep you all updated, i will try to have pics up tomarrow!!!

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #17 on: May 01, 2009, 01:18:10 PM »
The project is started

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #18 on: May 10, 2009, 10:48:26 AM »
My 500af, fitting the service honda exhaust to my chassis!!!!

Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: Another Project!!
« Reply #19 on: May 10, 2009, 10:59:06 AM »
Looking good! Invert your cylinder hose connection and get the 180 degree Service Honda radiator hose too! Gives you all the clearance you need next to the pipe.

« Last Edit: May 10, 2009, 01:24:47 PM by kxpegger »
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #20 on: May 10, 2009, 12:57:09 PM »
how much does the hose kit cost??? also i have a problem with my kickstart, it bottoms out on the frame before it gets the the peg!! how is the fix, do you have to space the kickstart out or what???

Offline jfabmotorsports.com

  • Moderator
  • Hero Member
  • *****
  • Posts: 602
Re: Another Project!!
« Reply #21 on: May 10, 2009, 01:07:45 PM »
The fix! 

JFAB
Don't just float through life, make waves!

Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: Another Project!!
« Reply #22 on: May 10, 2009, 01:30:06 PM »
how much does the hose kit cost??? also i have a problem with my kickstart, it bottoms out on the frame before it gets the the peg!! how is the fix, do you have to space the kickstart out or what???
Mine did that too from Service Honda. About 60 thousandths with a Dremel took care of the problem. JFab's picture shows much more removed but whatever works. Every frame and motor combo is going to be slightly different with different requirements for clearances.
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #23 on: May 10, 2009, 01:39:04 PM »
very NICE!! thanks for the advice , that was the route i was guessing but wasnt sure..get mine fixed up tomarrow, going to get everything welded next week, will get some pics up when i get it done!!

Offline The Flyin Hawaiian

  • Hero Member
  • *****
  • Posts: 597
Re: Another Project!!
« Reply #24 on: May 10, 2009, 04:14:44 PM »
Would anybody happen to have a picture of the airbox boot to airbox mounting? I did mine last night and would like to see how everyone else did theirs.
A couple of 03 and 04 KXs, a few YZs, 3 PE 400s, a DR and a TS.

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #25 on: May 18, 2009, 05:45:38 AM »
AJ if you are out there how do i get the service radiator hoses for my kx500af???

Offline elemeno187

  • Jr. Member
  • **
  • Posts: 10
Re: Another Project!!
« Reply #26 on: June 29, 2010, 12:24:34 AM »
Bad machines here!!!

Offline patz

  • Jr. Member
  • **
  • Posts: 10
Re: Another Project!!
« Reply #27 on: September 24, 2010, 03:52:39 AM »
Edgar:

I'm interested in purchasing your KX500 rolling chassis.  Any interest in selling it?  Where are you located?

pat

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: Another Project!!
« Reply #28 on: September 29, 2010, 12:37:52 AM »
sorry pat already sold it. i do have a cr500af on ebay right now if you are interested!

Offline patz

  • Jr. Member
  • **
  • Posts: 10
Re: Another Project!!
« Reply #29 on: September 29, 2010, 02:18:23 AM »
Thank you anyway.  I'm putting together an F450 moto style kx500 roadracer.  I already have my motor ( i initially tried to put it into a TZ250 chassis) and need some chassis pieces.