« previous next »
Pages: [1]   Go Down

Author Topic: Couple torque specs needed...  (Read 7364 times)

0 Members and 1 Guest are viewing this topic.

Offline PowerFiend

  • Full Member
  • ***
  • Posts: 169
Couple torque specs needed...
« on: January 27, 2010, 07:11:36 AM »
Can someone please supply me with a couple torque specs in Newton Meters? I never trust their conversions to ft/lb.

Flywheel nut -
Case bolts -
Drain plug -
Clutch hub nut -
Clutch spring bolts -
Kickstart bolt -

P.S. These would be good additions to the topend rebuild doc/thread.
Logged

Offline Dutch-K5 Fan

  • Hero Member
  • *****
  • Posts: 759
Re: Couple torque specs needed...
« Reply #1 on: January 27, 2010, 07:47:12 AM »
Well I've looked in my Clymer manul

Flywheel nut -           78nm    58ft.-lb
Case bolts -              26nm    19ft.-lb   
Drain plug -               20nm    15ft.-lb
Clutch hub nut -        98nm     72ft.-lb
Clutch spring bolts -   Can't find it. Maybe 26nm/ hand tight(securely) with blue 242 bloctite
Kickstart bolt -          Can't find it. Hand tight(securely) with blue 242 bloctite



Hope it's correct and helps you.


Dutchie

 
Logged
Proud owner of a KX500AF

Offline drewh14

  • Jr. Member
  • **
  • Posts: 29
Re: Couple torque specs needed...
« Reply #2 on: January 27, 2010, 07:52:13 AM »
Flywheel Nut: 78 Nm, 58 ft-lbs
Case Bolts: 9.8 Nm, 87 in-lbs
Drain Plug: 20 Nm, 14.5 ft-lbs
Clutch Hub: 98 Nm, 72 ft-lbs
Clutch Spring Bolts: 9.3 Nm, 82 in-lbs


All I can find for the kicker is "Kick Guide Mounting Bolts": 9.8 Nm, 87 in-lbs
Logged

Offline tschisi

  • Full Member
  • ***
  • Posts: 170
Re: Couple torque specs needed...
« Reply #3 on: January 27, 2010, 08:33:22 AM »
Be careful with the clutch spring bolts, mine were very easy to twist off...
I replaced them with standard screws and washers.
By the way, i didn?t add loctite. Is that "officially recommended?
Logged
2004 kx125
1990 kx500 (sold)

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: Couple torque specs needed...
« Reply #4 on: January 27, 2010, 12:46:48 PM »
This thread is scaring me a little.
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: Couple torque specs needed...
« Reply #5 on: January 27, 2010, 04:38:30 PM »
Logged
"The Truth Has No Agenda"

Offline PowerFiend

  • Full Member
  • ***
  • Posts: 169
Re: Couple torque specs needed...
« Reply #6 on: January 28, 2010, 05:58:49 AM »
You guys are awesome.  :-D
Logged
Pages: [1]   Go Up
« previous next »