Author Topic: KX500 Frame (Read 4000 times)

NastyNick · « **on:** November 20, 2003, 03:30:00 AM »

hey all!

I am kind of new here, but I have a question that I hope someone can answer.

I have a 93 KX500 that has some frame problems (dented, broken bottom motor mount, broken tab for the swingarm) and I have my eye on a frame from a 1989 500. The parts catalog has slightly different part numbers for the frame (1993: 32160-1095, 1989: 32160-1026). I am wondering if the 89 would fit the 93 without any alignment problems.

any help would be appricated.

Thanks!

NN

kawdude · « **Reply #1 on:** November 20, 2003, 02:22:24 PM »

I bet they will if the 89 uses the same type of swingarm linkage.

banshee_srb · « **Reply #2 on:** November 21, 2003, 11:33:51 AM »

I HAVE A 89 AND A 92 AND I INTERCHANGE THE ENGINE ON WINTER FOR ICE RACING AND FIT IN THE HOLE WHIOUT MODIFICATION!!!!

teamgreen500 · « **Reply #3 on:** November 21, 2003, 02:27:57 PM »

Nasty,

You might consider having your original frame rewelded and gusseted, like Team Green does for their race bikes. I'll be putting my motor in this weekend and I keep telling myself that I need to take and post the frame pic's. If I do, I'll post here for your reference.

Manny

NastyNick · « **Reply #4 on:** November 22, 2003, 05:43:40 AM »

Thanks for the input guys. I appricate it. I think I will get the 89 frame (because it's cheap) and then get the original welded up when I get the chance.

next project: raidators. mine are kind of "dented"

Paul · « **Reply #5 on:** November 22, 2003, 05:56:06 AM »

Nick, if the end caps are good then take them to local radiator shop to replace the cores. MUCH cheaper than news ones

NastyNick · « **Reply #6 on:** November 24, 2003, 10:44:52 AM »

Thanks Paul. I'll give that a try before I spend a huge wad on the new radiators.

NastyNick · « **Reply #7 on:** December 05, 2003, 04:18:28 AM »

I got the new frame and am wondering about one little thing. My old frame has a pipe mount low on the front of the frame as well as the two on the right side of frame. My new (the '89 frame) has only the two side mounts. According to the pictures on the kawasaki site (parts diagram), it's only has the two side mounts on the frame. Of course, both of my aftermarket pipes (Fatty and PC) have the flange in the correct location Mine looks like it was welded on by somebody other than the factory. So my question is: How many does yours have? If they have three, can I get by with only the two side mounts?

[/img]

gwcrim · « **Reply #8 on:** December 05, 2003, 05:08:04 AM »

My '89 has all three mounts.

kawdude · « **Reply #9 on:** December 05, 2003, 12:45:09 PM »

My 94 has the 3 mounts but I don't use that one. ..Let me rephrase this. The mount fell off and I haven't replaced it.

Author Topic: KX500 Frame (Read 4000 times)

NastyNick

kawdude

banshee_srb

teamgreen500

NastyNick

NastyNick

NastyNick

kawdude