« previous next »
Pages: [1]   Go Down

Author Topic: 1989 KX 250 Stator/Rotor  (Read 1244 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr4bl389

  • Newbie
  • *
  • Posts: 3
1989 KX 250 Stator/Rotor
« on: April 26, 2021, 08:45:10 AM »
Anybody have pics of alignment marks? When I set my stator to the 3 marks on the case and bring my piston to TDC my rotor mark is a 1/2 inch off. Always had starting issues with this bike. So my winter project was a full resto on this and putting the motor back together and finding this is possibly my starting issues? So thinking (bad idea) on my part I might have the wrong rotor? The number on the rotor is F3T81471. If anybody has pics, part #'s or help would be greatly appreciated.
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1989 KX 250 Stator/Rotor
« Reply #1 on: April 26, 2021, 03:30:02 PM »
Thats the correct Rotor for 1989 kx250.
Check your service manual for correct alignment.
Remember, you need spark before the piston reaches TDC.. probably something around 19 degrees.
Trust the timing marks...
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Mr4bl389

  • Newbie
  • *
  • Posts: 3
Re: 1989 KX 250 Stator/Rotor
« Reply #2 on: April 27, 2021, 10:55:57 AM »
OK Thanks for the info and quick response..
Logged
Pages: [1]   Go Up
« previous next »