Author Topic: changing fork seals  (Read 1757 times)

0 Members and 1 Guest are viewing this topic.

fast500#12

  • Guest
changing fork seals
« on: February 05, 2005, 06:48:09 AM »
i've got a blown fork seal and i have never pulled apart forks. is there any thing that i have to look out for when i take it a part?

mikesmith

  • Guest
changing fork seals
« Reply #1 on: February 05, 2005, 10:00:55 PM »
I think Cam posted this,but try pulling the dust seal down and run a piece of 35mm film or a stiff business card between the fork tube and seal.I use WD-40 at the same time to help flush dirt out,it may just be dirt and not a bad seal.

Rick

  • Guest
changing fork seals
« Reply #2 on: February 07, 2005, 01:49:29 PM »
Yup, cleaning the fork seal can save you $ and time.  Doesn't always work, but worth a try.  I use carb cleaner or brake cleaner to clean the seal while inserting a thin card under the lip.

As for taking the fork apart, I'll write a quick instruction post tonight to help.  Not really that tough.  Keep checking the site for my post.

Rick

fast500#12

  • Guest
changing fork seals
« Reply #3 on: February 19, 2005, 11:01:17 AM »
thanks, i tried the film thing but there was no joy.