Author Topic: kx 125 has a rattle in trans that seams like its trying to go into gear on its o  (Read 2753 times)

0 Members and 1 Guest are viewing this topic.

Offline bwill166

  • Newbie
  • *
  • Posts: 1
got a kx125 on the cheap. it has a rattle in the trans and looks and sounds like its trying to go into gear on its own. any ideas? much appreciated in advance.

Offline Ims Roll

  • Sr. Member
  • ****
  • Posts: 315
  • Ride safe, Ride hard
I had the same problem with a 2003 yz250 of mine. Does it inch forward in neutral?

Can't tell you exactly how i fixed it but i took the clutch basket out, and put it back in re tightened it and whala the noise went away and it stopped acting like it was trying to be put in gear. my thoughts were that the clutch basket was lose but maybe me turning the bike on it's side fixed it ha. good luck an keep us updated
The 2-smoke runs deep in this one...

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
got a kx125 on the cheap. it has a rattle in the trans and looks and sounds like its trying to go into gear on its own. any ideas? much appreciated in advance.

i had the same problem on my old `83 kx250... the former owner didnīt built one of the screws in, that securing the bearing, where the change drum sits. the drum was a little wander right and left so times and put a gear alone one., and so made it ​​a 5 meter jump forward. i fixed it and changed the 3.Gear and some other parts, of which broke down due to this missing screw. and its running great.

I think You Should split the case and take a look to the tranny to find the problem...
big 2 stroke bikes are weapons for real men, who donīt fear death or devil. ;O)
ī83 kx250, ī87 kx250 (with 360 big bore), 87 kx500, ī93 kx500 sfc

---  www.der-motopunk.de.tl  ---