« previous next »
Pages: [1]   Go Down

Author Topic: v force 3 to leave the insert or not?  (Read 2575 times)

0 Members and 1 Guest are viewing this topic.

Offline crazyolbastard

  • Full Member
  • ***
  • Posts: 150
v force 3 to leave the insert or not?
« on: June 03, 2010, 02:33:31 PM »
I got a set of v force 3 reeds and there is a insert that makes the intake track smaller.
Do I leave it in there?

Seems like I should but have to ask.

Thanks all.
Logged
Crazy Ol Bastard

Offline BasketCase

  • Full Member
  • ***
  • Posts: 53
Re: v force 3 to leave the insert or not?
« Reply #1 on: June 04, 2010, 03:03:45 AM »
Yep...
Logged
Nitrous is like a hot chic with STD's , you know you want to hit it but your afraid of the consequences.

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: v force 3 to leave the insert or not?
« Reply #2 on: June 05, 2010, 12:41:26 PM »
My insert is in.
 John
Logged
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline Goat

  • Hero Member
  • *****
  • Posts: 785
  • Ride it like you stole it!
Re: v force 3 to leave the insert or not?
« Reply #3 on: June 05, 2010, 02:38:16 PM »
The insert smooths out the flow of air/fuel through the reeds. It's best to leave it in. Uncontrolled turbulence is bad = less power. That is also why everyone is putting in the reed spacers. To move the reeds away from the turbulence caused by the piston moving at high rate of speed. I made a 1/4 inch thick spacer just to try the idea and wow what a difference it makes. Eventually I will get a spacer form JFab to compare the difference.
Logged
Quote from: Danger4u2 on June 17, 2010, 01:36:16 AM
It's hard to keep a drivers license riding a 2 stroke dirt bike on the street.  If you drive within the law they are VERY boring.

Offline crazyolbastard

  • Full Member
  • ***
  • Posts: 150
Re: v force 3 to leave the insert or not?
« Reply #4 on: June 08, 2010, 11:41:13 AM »
Sounds good.
Thanks for your wisdom Goat.
I`ve been fixing stuff and the forks are next up.
I`ll keep the spacer in mind.

Ride on!
Logged
Crazy Ol Bastard

Offline oic0

  • Full Member
  • ***
  • Posts: 172
Re: v force 3 to leave the insert or not?
« Reply #5 on: June 11, 2010, 08:59:57 AM »
Anyone ever done a before and after dyno with a spacer? I wonder what the ideal distance is.
Logged
2000 KX500
1998 Warrior, with RD350 engine (Blown up)
1973 RD350 (In storage)

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: v force 3 to leave the insert or not?
« Reply #6 on: June 11, 2010, 11:41:36 AM »
Hey Craz,
 It only takes about thirty minutes to install and remove the stuffer, maybe you could give us your opinion on what worked best for you.
  Not only would the stuffer keep the air moving smoothly through the assembly, (Laminar Flow-Goat) But wouldn't it also increase the velocity of the air/fuel mix
 (venturi effect-Bernoulli's Principle:http://home.earthlink.net/~mmc1919/venturi.html )
  and help "pack" the crankcase?

Tuck\o/

« Last Edit: June 11, 2010, 06:05:42 PM by Friar-Tuck »
Logged
"The Truth Has No Agenda"
Pages: [1]   Go Up
« previous next »