« previous next »
Pages: [1]   Go Down

Author Topic: 1990 KX500 forks  (Read 2146 times)

0 Members and 1 Guest are viewing this topic.

Offline fitter

  • Jr. Member
  • **
  • Posts: 14
1990 KX500 forks
« on: May 17, 2012, 10:28:12 AM »
Hi guys,

I bought a 1990 KX500 recently and am wondering what can be done with the suspension.  Will it handle ok with heavied fork springs and a rear spring?  Or should I look around for newer forks for it?  I am going to be trail riding mainly.  What weight springs would you suggest for it?

Thanks

Fitter
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 1990 KX500 forks
« Reply #1 on: May 18, 2012, 05:03:34 AM »
Don't know how much money you're looking to spend...but it might be in your interest to call Factory Connection.For what type of riding you'll be doing,I see no need to get newer forks/shock.A good re-valve and possibly heavier springs should set you up just fine.


       http://factoryconnection.com/index2.htm

« Last Edit: May 18, 2012, 05:08:33 AM by Foxx4Beaver »
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline Rhyno

  • Jr. Member
  • **
  • Posts: 17
Re: 1990 KX500 forks
« Reply #2 on: May 18, 2012, 08:37:01 AM »
My suspension was worked over before I got it, but it only has stiffer springs.  That's not to say that you don't need "re-valving."

I weigh 250 with gear, and my sag is correct, as to what is "recommended."  I have a Pink rear spring, but don't know what the rating is.

My only partial complaint is the seat height.  I am 6'1" and have a 37" inseam, and I knee the rear fender, sometimes.  Maybe I am just gettin' old, though.

-Rhyno
Logged
'90 K5.....
Pages: [1]   Go Up
« previous next »