« previous next »
Pages: [1]   Go Down

Author Topic: sand prep  (Read 4750 times)

0 Members and 1 Guest are viewing this topic.

Offline one54ton

  • Newbie
  • *
  • Posts: 6
sand prep
« on: March 24, 2009, 03:13:50 PM »
looks like im hitting up pismo beach the weekend.  my tire will be mounted as of tomorrow and the pre-filter is in...what other prep does my bike need to survive the sand?
Logged

Motorrad

  • Guest
Re: sand prep
« Reply #1 on: March 24, 2009, 03:40:34 PM »
WD-40 the snot out of it.... that salty sand will eat the bike alive......    WASH IT LIKE YOU HAVE NEVER WASHED IT  the second you get home. then coat the entire bike in penitrating oil...  or every single piece of hardware, etc etc will be thrashed....

I normaly keep a can of wd40 in camp    and hose the bike down with it after every ride... (not the brakes).......    I like WD40 for this as it tends to dry up and not attract sand like other stuff will.... 
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: sand prep
« Reply #2 on: March 24, 2009, 04:46:59 PM »
You already got some awsome advice but I would like to throw in my two cents. I would go up three full sizes on the main jet from what you would typically run. You are going to be at sea level and putting the bike under a big load. It's going to want to burn some fuel and if you don't give it to it it will burn the engine. For example, 168 jet would go to a 175 jet. Also If your bike is a stock compression bike it will be very happy and cooler running if you put some trick 100 octain fuel in it.
« Last Edit: March 24, 2009, 04:49:35 PM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline turtle22

  • Full Member
  • ***
  • Posts: 180
  • '89 & '01 kx500 '87 fxr HD '80 xr500
Re: sand prep
« Reply #3 on: March 24, 2009, 05:29:24 PM »
im going to pismo with my family and riding buddies next weekend(april3-5th). i have never been. i have heard there are lots of retards there and flags are a must
Logged
lets ride

Offline fatboy2k500

  • Jr. Member
  • **
  • Posts: 12
Re: sand prep
« Reply #4 on: March 24, 2009, 05:51:17 PM »
Quote from: turtle22 on March 24, 2009, 05:29:24 PM
im going to pismo with my family and riding buddies next weekend(april3-5th). i have never been. i have heard there are lots of retards there and flags are a must

I'll be over there the 9th and 10th.  Also getting mine prepped.  The ol 250 was prepped for it, just picked my k5 yesterday so trying to get it situated before hand.  Get a nice flag holder and a large diameter flag (just a recommendation), WD40 is DEFINITELY your friend.  Make sure you put grease between the filter and the box, it'll trap any sand that MAY get in there so you can clean it later.  Sand is a *&!@# on parts out there, clean the hell out of it, along with those pucks that cover the wheel bearings.  Be safe, and have a blast man!

Tony
Logged

Offline turtle22

  • Full Member
  • ***
  • Posts: 180
  • '89 & '01 kx500 '87 fxr HD '80 xr500
Re: sand prep
« Reply #5 on: March 31, 2009, 01:10:52 PM »
so im going to pick up a paddle tire tonight& in stall it tommorrow.my chain is about half waypiont on the  adjustment, will i need to put a link in my chain? i dont have a mud flap(if that gives any room)
Logged
lets ride

Offline dsrtrider

  • Full Member
  • ***
  • Posts: 137
Re: sand prep
« Reply #6 on: March 31, 2009, 01:18:43 PM »
fyi  this is a link for flag mounts if you dont have one yet

http://www.kxriders.com/forums/index.php/topic,514.0.html

i think there is another link for a shock cover if your mud flap has to be removed.  may want to increase compression clickers to better handle the sand
Logged
current bike 2007 ktm 300 xc-w - keeping two strokes alive
1994 kx500 -sold-made me the man i am today

1990 kx500-sold
1982 kx250-sold
1979 rm125-sold
1978 kdx125 -sold
1977 xr75 - first bike

Offline turtle22

  • Full Member
  • ***
  • Posts: 180
  • '89 & '01 kx500 '87 fxr HD '80 xr500
Re: sand prep
« Reply #7 on: April 01, 2009, 03:32:08 AM »
thanks, but i made a flag mount in the shop(looks homemade but it will work). thanks on the other info. i will check it out :-)
Logged
lets ride

Offline maddoggy

  • Hero Member
  • *****
  • Posts: 711
  • K5 @ ST. ANTHONY DUNES
Re: sand prep
« Reply #8 on: April 01, 2009, 08:44:01 AM »
my advise would be the same as BDI's, to not go cheap on the fuel. you will want all the power your bike can give and pump gas won't cut it. if your not running the mudflap/shock protector then i would for sure come up with something to protect the shock shaft from sand damage. you'll definitely want to clean that salty sand off of everything you can when you are done riding.   MADDOGGY
Logged

Offline dangerous dean

  • Jr. Member
  • **
  • Posts: 43
Re: sand prep
« Reply #9 on: July 02, 2009, 02:37:09 PM »
having done a few beach races over in UK ive found a few tips to keep you going,1, find a old bicycle inner tube 1"diameter and cut into 3 2"lengths put them over your kickstart pivot and both footpegs,2, use filter skins if your out there for a while,easier to pull off and keep going then to fanny around changing filters and risk sand in the carb,3, use a 1.8bar rad cap cos its gonna get hot! 4,use a pair of the old ladies tights over your rads keeps most of the sand out and you can just rip them off when full up! 5, take spare pair of pads for the rear(sand eats them for breakfast) hope any of my ideas help you!!!! :evil:
Logged

Offline barryadam

  • Full Member
  • ***
  • Posts: 191
Re: sand prep
« Reply #10 on: September 16, 2009, 07:55:29 AM »
Quote from: one54ton on March 24, 2009, 03:13:50 PM
looks like im hitting up pismo beach the weekend.  my tire will be mounted as of tomorrow and the pre-filter is in...what other prep does my bike need to survive the sand?

Save the beast.  Just rent when you get there.  Worth every penny.
Logged
"I hate heli-coils. They are like hospice for motorcycle parts."- BDI
Pages: [1]   Go Up
« previous next »