Author Topic: KX250AF Radaitors!!  (Read 5343 times)

0 Members and 1 Guest are viewing this topic.

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
KX250AF Radaitors!!
« on: March 16, 2009, 01:00:42 PM »
HEY AJ if you see this what is the best route for the rads on my 250af, im using a 06 frame, thought about using two rights, maybe see if u have any suggestions?!?!

Offline Reddy

  • Full Member
  • ***
  • Posts: 68
Re: KX250AF Radaitors!!
« Reply #1 on: March 18, 2009, 09:35:44 AM »
HEY AJ if you see this what is the best route for the rads on my 250af, im using a 06 frame, thought about using two rights, maybe see if u have any suggestions?!?!
For mine I'm using 2 CR250 rads! Will go straight on with bracket for the top mounting.

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: KX250AF Radaitors!!
« Reply #2 on: March 19, 2009, 11:58:29 AM »
do they bolt straight up??what model cr rads are you using?? did you have to do any mods to make them work??

Offline Reddy

  • Full Member
  • ***
  • Posts: 68
Re: KX250AF Radaitors!!
« Reply #3 on: March 20, 2009, 10:00:08 AM »
do they bolt straight up??what model cr rads are you using?? did you have to do any mods to make them work??
Using rads from CR250 2002-2007. Bolt straight on to right hand side, just need to make an extension for top mounting, will go straight onto the left hand side if you weld the mount back on inline with the right hand side!!

Only slight problem is the hose is a different size!!!

Offline AJ

  • Full Member
  • ***
  • Posts: 134
Re: KX250AF Radaitors!!
« Reply #4 on: March 20, 2009, 10:17:30 AM »
that left is way long  huh?

i use 2 rights, highly moded



but on prototype bikes ive also used
KX250 rads..or as mentioned ...
CR250 rads will be something you can make work pretty easy.

Offline edgar_kx3

  • Full Member
  • ***
  • Posts: 91
Re: KX250AF Radaitors!!
« Reply #5 on: March 21, 2009, 02:40:43 PM »
yeah i couldnt get my hands on cr rads we didnt have any at the shop so i ended up using 2 rights, like aj said highly moded :-D i have had to relocate every spicket, but i do have them mocked up and ready to weld, need to get some pics on here so you can check it out...have to say thanks to kawi for makin there rads so easy to flip around..haha