« previous next »
Pages: [1]   Go Down

Author Topic: Gnarley pipe  (Read 5589 times)

0 Members and 1 Guest are viewing this topic.

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Gnarley pipe
« on: March 03, 2009, 07:28:08 AM »
Will it fit under my IMS 3.6 gallon tank?

Also I understand its  a better bottom-mid range power pipe than stock? Does top end go away?

With stock reeds, will it make any difference?
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline slow600

  • Full Member
  • ***
  • Posts: 130
Re: Gnarley pipe
« Reply #1 on: March 04, 2009, 10:57:28 AM »
here a pic of mine with ims tank. it cleared but just barely. bike pulled hard off the bottom but seemed to flatten out up top.
Logged

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: Gnarley pipe
« Reply #2 on: March 04, 2009, 02:15:54 PM »
SO is the top end still good? Heres a pic of mine. Notice the bash plate. Think that pipe will fit with it?



Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: Gnarley pipe
« Reply #3 on: March 04, 2009, 02:35:53 PM »
Nope, not without some mods.  The lower portion is fatter and has a different curve. Excellent pipe but it takes quite a bit of "rush" off the top end.  I liked it since I typically ride fastest using midrange power and short-shifting. Not a pipe for screaming through the desert. For MX it would be awesome. Cam.
Logged

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: Gnarley pipe
« Reply #4 on: March 04, 2009, 03:05:30 PM »
Quote from: KXcam22 on March 04, 2009, 02:35:53 PM
Nope, not without some mods.  The lower portion is fatter and has a different curve. Excellent pipe but it takes quite a bit of "rush" off the top end.  I liked it since I typically ride fastest using midrange power and short-shifting. Not a pipe for screaming through the desert. For MX it would be awesome. Cam.

Well, I dont MX. I ride alot of single track here, and the bottom end is still good enough for me with stock pipe. And the FMF ISDE can.

I also do lots of desert stuff and want to keep what top end I have. So that pipe sounds like it isnt for me.\

Ideas for more power without losing topend, and maintaing the bottom end?
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline kwakman

  • Hero Member
  • *****
  • Posts: 879
  • Kwikasfuki KX500
Re: Gnarley pipe
« Reply #5 on: March 17, 2009, 11:55:08 PM »
go for a pc platinum1.good top end shunt.
Logged
And lo, I did loft the front wheel and carried it forth to the unbelievers, and cast it down before them and said unto them ''look now upon the might of my throttle control ye pitiful cretinous ones''
And the unbelievers did quake in their boots....

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: Gnarley pipe
« Reply #6 on: March 18, 2009, 11:59:41 AM »
I have a Gnarly under my IMS big tank and it fits perfectly. The Gnarly moves the power to a lower RPM point,and I dont think it revs quite as high, but this makes the bike nicer to drive on tight trails and deep mud.
 My kicker does however bump the pipe a little unless it is completly folded in.
 If pipes were cheaper, I would love to have a selection to play with.
Logged
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline Neilios

  • Jr. Member
  • **
  • Posts: 11
Re: Gnarley pipe
« Reply #7 on: March 19, 2009, 08:27:54 AM »


Gnarley Pipe with a KX250 tank. I like it more bottom to mid range power.
Logged

Offline KTMEXC125

  • Jr. Member
  • **
  • Posts: 20
Re: Gnarley pipe
« Reply #8 on: March 20, 2009, 11:00:19 AM »
hey neilios,
what year is your k5? and what year of a kx250 tank is that? did you do a tank conversion?
Logged
be the hitter not the hit

Offline zokalr13

  • Jr. Member
  • **
  • Posts: 14
Re: Gnarley pipe
« Reply #9 on: March 20, 2009, 03:02:24 PM »
  I have the stocker and the GNARLY- i am in the process of de-bugging my recently purchased 2000 KX500- ive replaced the air-filter with a new UNI unit,checked the jet sizes :168 + 58 and cleaned the carb out and will re do the float level- after researching I noticed that i should have re-bent the float tang -ill do it tommorow..anyway,back to the pipe thing..i havent ran the bike optimumly until the float is done but as far as the pipe goes [GNARLY] I dont dig it too much -i probably will put the stocker on until i can get the other pipe on [pro-circuit]or??- I want full rev out and i ride more flat out style than plunking slowly so i need the MX setup than woods... BTW, I gave up on a street kit for my KX5, I got me an ol DR650 that is great for around town, work ,etc so when i get this ol SUZY up to snuff [jet kit,bars etc..]then the KX500 will be restored to her former glory.... :lol:
Logged

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: Gnarley pipe
« Reply #10 on: March 21, 2009, 04:40:42 PM »
Logged

Offline BullKaw

  • Jr. Member
  • **
  • Posts: 25
Re: Gnarley pipe
« Reply #11 on: March 21, 2009, 08:00:16 PM »
I asked this guy who dyno'd the bike and he responded "A performance shop in N.Y." I of corse asked which one? Stay tuned!
Logged
If you don't have time to do it right the first time, when are you going to have time to fix it!

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: Gnarley pipe
« Reply #12 on: March 22, 2009, 05:58:54 AM »
Quote from: BullKaw on March 21, 2009, 08:00:16 PM
I asked this guy who dyno'd the bike and he responded "A performance shop in N.Y." I of corse asked which one? Stay tuned!

Plus, was that measured at the wheel?
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.
Pages: [1]   Go Up
« previous next »