1989 KX500 Electrical Question

[Driift]

See the attached picture.

I have the white/red white/green and black/yellow wire but a spare black/white coming from the stator. I see the long black that connects to the coil abs have the two short wire (black/white abs black I assume go to the stop switch).

Any idea on the spare black/white wire from
The stator there is only one female and the only other black/white wire I have is also female coming from the cdi which I assume is for the stop switch.

Ideas?

[Driift]

Upload folder full pic

[Driift]

[kxpegger]

Clymer Manual for 1989

Black - CDI - + Coil
Black/Yellow - CDI - Ground
White/Red - CDI - Magneto
White/Green - CDI -  Magneto
Black/White - CDI - Magneto
Black/White - Kill Switch
Black - Kill Switch ground

[Driift]

Thanks. I only have one black white wire coming off the cdi. It appears it’s for the kill switch. I don’t have another from the cdi. The cdi has the black yellow white red and white green but there is one black white female plug from the magneto.

[Driift]

Wonder if Incan split the black white wire coming from the cdi so it
Goes to both the kill switch and the magneto ??

[Driift]

Turns out that black wire is a reconnect higher up to
The other black/white wire. Banging now.