Author Topic: Tire changing instructions  (Read 28512 times)

0 Members and 1 Guest are viewing this topic.

idrinkmercury

  • Guest
Re: Tire changing instructions
« Reply #15 on: November 04, 2006, 05:23:19 PM »
So I have never changed a motorcycle tire in my life. The local shop charges 15$ if you bring the rim and tire combo. I decided to take up the challenge. I bought three motion pro tire irons (@4.95/piece from rockmountainATV) and stole a few pumps of dawn from my kitchen.

Using your tutorial, I changed the tires in less than 20 minutes a piece (using only the tire irons and soapy water). So in short--the tire irons paid for themselves, I have a new set of Maxxis IT and tubes on my KX500-tire eater, saved some pennies, and impressed a friend with my newly aquired tire changing skills.

Thanks for teaching me how to "fish" well.

Offline BrokenSpoke

  • Jr. Member
  • **
  • Posts: 38
Re: Tire changing instructions
« Reply #16 on: January 02, 2007, 02:41:17 PM »
Here is a grerat 3 part video on changing a tire.  Take very little effort and more importatly, it works.  I had been ouit of riding for 18 years and dreaded my first tire change.  Watched these clips, and changed the tire in about 15 minutes.  I took my time and didn't rush at all since I was very rusty.

http://www.transworldmotocross.com/mx/how_to/article/0,13190,1215721,00.html

Offline FactoryPhil

  • Full Member
  • ***
  • Posts: 80
Re: Tire changing instructions
« Reply #17 on: September 09, 2007, 06:13:39 AM »
Just to add my .02..I use a Motion Pro Bead Buddy to keep the tire bead from slipping back into the  rim when dismounting and mounting the tire. It eliminates the need for the third tire iron in my experience. A friend of mine bought the tool and couldn't seem to grasp the concept of its use and asked if I wanted it. I had thought about buying one for a while but was too cheap....best free tool I ever got!
It's not if you crash ...it's when
I'm on IRC efnet #mp3addics-chat Mechanos or MechServ

Offline turtle22

  • Full Member
  • ***
  • Posts: 180
  • '89 & '01 kx500 '87 fxr HD '80 xr500
Re: Tire changing instructions
« Reply #18 on: February 18, 2009, 07:56:01 AM »
all that is good advice, i like to stand back and let my(260lbs) best friend do it :wink: he has it down pretty good, 2 tire irons baby powder  and a little patients. gets it done evry time(with a little help from me)
lets ride

Offline azdirtrider75

  • Full Member
  • ***
  • Posts: 104
Re: Tire changing instructions
« Reply #19 on: February 18, 2009, 09:26:11 AM »
The bead buddy is great. I always try to get the tire as warm / hot as possible before changing (not too difficult here in AZ) warm tires stretch and help with changing. I always use a spray bottle 1:1 ratio of water and dish soap (also helps to check for holes in your tube). I highly recommend using the extra heavy duty tubes; I've changed my rear tire now three times and still able to use the same tube. I always use soapy water to check; I also have a spare tube on hand in case I screw up or when the other tube finally wears out.
Live in the Phoenix Metro? (East Valley) Contact me, let's ride
azdirtrider75
nateopie@hotmail.com

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Tire changing instructions
« Reply #20 on: April 19, 2009, 10:08:34 AM »
Here is a grerat 3 part video on changing a tire.  Take very little effort and more importatly, it works.  I had been ouit of riding for 18 years and dreaded my first tire change.  Watched these clips, and changed the tire in about 15 minutes.  I took my time and didn't rush at all since I was very rusty.

http://www.transworldmotocross.com/mx/how_to/article/0,13190,1215721,00.html

The other "old skool" trick in leu of a "bead buddy" is to jam a 3/8 drive 9/16" socket between the rim and tire bead. This trick keeps the tire bead down in the rim's spoke valley which allows the tire to stretch easier over the rim. having the tire out in the hot sun for a few hours is a bonus as well!
« Last Edit: September 30, 2010, 04:03:50 AM by Polar-Bus »
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline 98kaw500rider

  • Jr. Member
  • **
  • Posts: 44
Re: Tire changing instructions
« Reply #21 on: March 03, 2010, 11:28:14 AM »
Yea. I had a 92 wr500 and had to cut the stock rear tire off , putting the new kenda milleville sticky on it was a work out ! All i used were tire irons the shop sold me with tire , Now i know what he was grinning about as he handed me the little tire irons and said good luck . :|

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Tire changing instructions
« Reply #22 on: September 30, 2010, 04:07:02 AM »
Yea. I had a 92 wr500 and had to cut the stock rear tire off , putting the new kenda milleville sticky on it was a work out ! All i used were tire irons the shop sold me with tire , Now i know what he was grinning about as he handed me the little tire irons and said good luck . :|

Next time place the tire flat on your driveway when it's sunny and hot. let the tire sit for severall hours. Wear MX gloves when handling the tire ! The hot, soft tire bead will stretch over the rim WAY easier. In the winter or "no sun" days, I place the tire near my furnace in the basement to warm the tire.

PS, you have no idea as to a "stiff" tire, until you have the dis-pleasure of attempting to mount a Trelleborg ice tire with cheap tire spoons !   :x
« Last Edit: September 30, 2010, 04:10:06 AM by Polar-Bus »
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline VON DEM

  • Newbie
  • *
  • Posts: 7
Re: Tire changing instructions
« Reply #23 on: February 20, 2011, 09:32:57 AM »
HI , IF YOU STRUGGLE TO BREAK BEAD BECAUSE ITS WELDED ON WITH AGE , PUT TYRE WITH WHEEL IN A BIG VICE WIND IT IN ON TYRE AND MOVE WHEEL SIDE TO SIDE , IVE DONE THIS FOR YEARS BUT ONLY WITH TYRES I DONT WANT TO USE AGAIN

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Tire changing instructions
« Reply #24 on: February 20, 2011, 10:33:32 AM »
VON DEM ,  if you would, please take the CAP lock off.  On this site all caps designates yelling or screaming.
« Last Edit: February 20, 2011, 10:36:18 AM by Danger4u2 »
KX 500 Rider

Offline quickrip

  • Jr. Member
  • **
  • Posts: 21
  • carnegieforever.com
Re: Tire changing instructions
« Reply #25 on: September 01, 2011, 01:22:50 PM »
great help thanks man
93 kx5          08 yz250
93 kdx200     72 honda qa50
71 trail 50      96 pw50
85 xl250