Author Topic: 38mm carb on kx500  (Read 3757 times)

0 Members and 1 Guest are viewing this topic.

Offline k2000x

  • Jr. Member
  • **
  • Posts: 41
38mm carb on kx500
« on: November 11, 2015, 09:48:23 PM »
Got a 04 kx500 wanting to put kehin 38 mm carb on it were or what size jets should I use

Offline RoostiusMaximus

  • Sr. Member
  • ****
  • Posts: 301
    • Millar Racing Engines
Re: 38mm carb on kx500
« Reply #1 on: November 12, 2015, 04:37:51 AM »
a 38mm PWK airstriker from a 2000 cr250 has been the ticket for these CR5 and KX's when we're running them for woods or with pulse induction.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 38mm carb on kx500
« Reply #2 on: November 12, 2015, 09:42:58 AM »
good to know.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline k2000x

  • Jr. Member
  • **
  • Posts: 41
Re: 38mm carb on kx500
« Reply #3 on: November 12, 2015, 10:20:31 PM »
That's the carb I've got. Don't think the 250 jets will feed it any help

Motorrad

  • Guest
Re: 38mm carb on kx500
« Reply #4 on: November 13, 2015, 01:33:29 AM »
No idea. Never tried one.  But I'd try stock k5 settings first.. They should be close.
168M 55P. 1.5 turn on air bleed.  M NEEDLE on #3

The only thing that may get you into tuning nightmare is the slide cutaway

Offline RoostiusMaximus

  • Sr. Member
  • ****
  • Posts: 301
    • Millar Racing Engines
Re: 38mm carb on kx500
« Reply #5 on: November 13, 2015, 03:17:09 AM »
250s will normally be richer jet on the main  :wink:
The airstriker series always needs a little more pilot than the standard pwk's too.
I'd start pilot at 55, main 175, the carb would come with a 48 pilot and a 180 main
« Last Edit: November 13, 2015, 03:23:21 AM by RoostiusMaximus »