Author Topic: 07 KTM 250sxf/500kx conversion  (Read 34363 times)

0 Members and 2 Guests are viewing this topic.

Offline hunter

  • Jr. Member
  • **
  • Posts: 28
Re: 07 KTM 250sxf/500kx conversion
« Reply #30 on: April 16, 2020, 11:41:47 AM »
New update:

Pretty much got the bike at about 95% done last year. But was late fall. Decided not to start her up and winterized it.

Brought her out this week to finish her up and double check things. She kicked off first kick! Done a few heat cycles.  Down side is after sitting the brake components are shot so I'll be rebuilding everything. Parts should be here next week for that. Then it's time to work on the jetting...but I think it's pretty close.

Will add some pictures as I start cleaning her up. Thanks to everyone who has helped me along the way on this project.

Offline hunter

  • Jr. Member
  • **
  • Posts: 28
Re: 07 KTM 250sxf/500kx conversion
« Reply #31 on: May 02, 2020, 05:39:09 AM »
Heres a current picture. Still trying to get the front brake bled...bastard! Hopefully be working on jetting today.


Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: 07 KTM 250sxf/500kx conversion
« Reply #32 on: May 02, 2020, 09:17:01 AM »
Looking good! 8-)
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline hunter

  • Jr. Member
  • **
  • Posts: 28
Re: 07 KTM 250sxf/500kx conversion
« Reply #33 on: May 02, 2020, 02:36:08 PM »
Minor hiccup today, noticed some oil coming through my powervalve seals by the linkage. So I'm going to address this before continuing on with jetting. I'm a little bummed but it needs to be addressed.