Author Topic: Can't get started kx500  (Read 2609 times)

0 Members and 1 Guest are viewing this topic.

Offline fredunderwood

  • Jr. Member
  • **
  • Posts: 37
Can't get started kx500
« on: December 23, 2013, 01:27:33 PM »
Ok. So I'm trying to get the ol kx started....got it running.....it was idling, and when I give  it some throttle it stopped.   Tried kicking it over again and got some kickback from the kickstarter, but that's it.  I put a brand new carb on from a kx250.  Running a 175mj. A 42pj. 

I can usually get it started to idle, but then give it throttle and stalls out....ideas, suggestions?

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Can't get started kx500
« Reply #1 on: December 23, 2013, 01:34:52 PM »
try a 60 pilot jet
"Let there be light"

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Can't get started kx500
« Reply #2 on: December 23, 2013, 02:24:25 PM »
+1 on the 60 Pilot...
but also make sure your float height is right on, or you could be pissin directly into the wind.
« Last Edit: December 23, 2013, 02:28:02 PM by Foxx4Beaver »
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: Can't get started kx500
« Reply #3 on: December 23, 2013, 03:22:49 PM »
here is a good help for jetting ...

http://www.oem-cycle.com/KX500JETTINGGUIDE.shtml
big 2 stroke bikes are weapons for real men, who don´t fear death or devil. ;O)
´83 kx250, ´87 kx250 (with 360 big bore), 87 kx500, ´93 kx500 sfc

---  www.der-motopunk.de.tl  ---