As it says. I traded my PS3 for a 99 KX250. Its supposed to run, but I dont have my hopes up. I started the tear down after work today. Heres what I have found so far. The rear wheel assembly (rim, hub, spokes) is trashed. The holes in the wheel are pulled through, same on the hub. Rotor and sprocket no good. Tire is decent, prolly 75%. Swingarm is good, one of the adjuster bolts brought the threads out of hole. Ill just tap it to the next size bolt. The linkage is trashed. I was hoping it was just the bearing, but its wore into the bore of the linkage itself. Swingarm bolt has excessive wear spots and bearings are shot. Shock bores are good. Front wheel assembly is the same way, junk. Forks have no oil in them as they have no rebound control. Kick start is missing, the shaft is broke off, and was told that it didnt catch all the time. Cables are just about wore though in spots. Twist throttle housing is cracked. Bars are bent. Radiators are tweaked, one looks like it may have been leaking. The brass inserts in the fuel tank are long gone. Plastic and seat is trashed. Theres more to come as I am still tearing apart. I really need some parts cross reference information, resources, ect..... Thanks, Chris
