Author Topic: 86 k5 questions  (Read 1830 times)

0 Members and 1 Guest are viewing this topic.

Offline tcoop474

  • Full Member
  • ***
  • Posts: 89
86 k5 questions
« on: July 08, 2011, 07:09:47 AM »
i just picked up my first k5 last sunday and its missing a few parts. its, missing number plates (sides), right shroud, kick starter, it needs new plastics all around though, new radiators as they are dented inwards bad, shift pedal lever (the one on it is not the one for the k5 the prev owner just made one fit), the seat is fallind apart underneath as well tears in the seat, the foot pegs are twisted and wobbly as well, and to top it off i noticed the exaust side of my sub frame is gone, its missing from about right under the bottom of the seat back.
Whats the best site for part for the 86? what years parts are interchangable? (i know 89-up wont fit) How should i go about fixing the sub frame?
thanks for any help guy
Tommy
86 k5 Pro Circuit Exhaust, bored .30 over all i know about it,
(restoration)
89 trx250r bored 68mm, Lrd exhaust, boyesen reeds, nacs graphics, k&n filter and more, currently under going complete rebuild.
87 trx250r bare frame (restoration)

Offline kwakman

  • Hero Member
  • *****
  • Posts: 879
  • Kwikasfuki KX500
Re: 86 k5 questions
« Reply #1 on: July 09, 2011, 09:42:14 PM »
hi tommy, the subframe will need repairing, at a metal shop if you cant do it yourself, else it is a new frame im afraid, as they are all one part.the seat can be replaced by using an 85 86 or 87 seat bought second hand on ebay or ceet racing will sell you a new one.replacement plastics are available from maier manafacturing in the usa, just google search it and your laughing. as for the radiators, 3 of the 4 mounts on 86 rads are the same as the 87 on type.you can cut and flip the mount,(if your handy at welding ally?) or just use 3 mounts with blue loctite and keep an eye on them, which I will be doing.chinese pattern radiators are available on ebay, and seem to be ok if you want a new set,although the mounting holes may need a kiss from a circular file, or use kwak 87 on ones, either ebay or new from a dealer.if you have any other questions, just give me a yell,K.
And lo, I did loft the front wheel and carried it forth to the unbelievers, and cast it down before them and said unto them ''look now upon the might of my throttle control ye pitiful cretinous ones''
And the unbelievers did quake in their boots....

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: 86 k5 questions
« Reply #2 on: July 10, 2011, 06:39:20 AM »
www.nosparts.se  has a NOS frame for the 86 k5 part number 32002-1835

just shoot off an email to nosparts@telia.com for prices


seat:

 http://cgi.ebay.ca/86-1986-KAWASAKI-KX500-KX-500-SEAT-/400227245691?pt=Motorcycles_Parts_Accessories&hash=item5d2f671e7b

« Last Edit: July 11, 2011, 08:28:37 AM by 1989kawasaki »
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline tcoop474

  • Full Member
  • ***
  • Posts: 89
Re: 86 k5 questions
« Reply #3 on: July 10, 2011, 07:46:10 AM »
subframe wont be a problem i guess i should have been more specific i can weld and have a machine shop in my basement i guess i was saying what size tubing and stuff like that but ill fig that part out...and as for parts i found a site called worldofpowersports ive got parts from a dealer in town from them b4 and i just happend to stumble across the box and checkd the site out and its awesome
86 k5 Pro Circuit Exhaust, bored .30 over all i know about it,
(restoration)
89 trx250r bored 68mm, Lrd exhaust, boyesen reeds, nacs graphics, k&n filter and more, currently under going complete rebuild.
87 trx250r bare frame (restoration)