Author Topic: Fuel petcock very hard to turn  (Read 5881 times)

0 Members and 1 Guest are viewing this topic.

Offline bturton

  • Jr. Member
  • **
  • Posts: 26
Fuel petcock very hard to turn
« on: June 23, 2011, 12:07:35 PM »
Hey fellow power mongers....
Just a quick question. Is there a better fuel valve to use as a replacement for this pliers needing POS part?
I have taken it apart and tried to smooth out the plastic valve with no luck.

PS. I have been lurking here for a while now, both while looking for a 5hundie and now that I have one, looking at ways to maintain and improve "The Monster!"

I will post up in the New Members section when I have some pictures to post.

Thanks all....




Brad

Offline ID KX500

  • Hero Member
  • *****
  • Posts: 626
  • Life, Liberty, and The Pursuit of Happiness
Re: Fuel petcock very hard to turn
« Reply #1 on: June 23, 2011, 12:57:23 PM »
Acerbis has one at.    justgastanks.com
"Endeavor to persevere."

Offline sniper1

  • Full Member
  • ***
  • Posts: 238
Re: Fuel petcock very hard to turn
« Reply #2 on: June 23, 2011, 01:12:04 PM »
Just an old guy that enjoys going fast, I was in the army for 6 years and bought my first K5 when I returned from basic training. I raced a yz60 from age 6 to 8  a kx80 from 8 to 12  a kx125 from 12-17 intermediate class on k5 which I've owned 3.

Offline bilger69

  • Full Member
  • ***
  • Posts: 145
  • 99 Kx500
Re: Fuel petcock very hard to turn
« Reply #3 on: June 23, 2011, 01:49:47 PM »
.

Offline bilger69

  • Full Member
  • ***
  • Posts: 145
  • 99 Kx500
Re: Fuel petcock very hard to turn
« Reply #4 on: June 23, 2011, 02:24:13 PM »
Once again i post a long message and it doesnt show up. Son of a batch

Offline MinitubbedvegA

  • Jr. Member
  • **
  • Posts: 20
    • The Bullet
Re: Fuel petcock very hard to turn
« Reply #5 on: June 23, 2011, 02:40:57 PM »
Anybody know of one with a reserve? I have a bad habit of runing low on fuel real far from my truck...

Offline bturton

  • Jr. Member
  • **
  • Posts: 26
Re: Fuel petcock very hard to turn
« Reply #6 on: June 23, 2011, 03:02:05 PM »
Thanks all!
Didn't really want to replace with a stocker.....
Now I have a few options when I stop into the bike shop.

Brad

Offline serafin

  • Full Member
  • ***
  • Posts: 161
Re: Fuel petcock very hard to turn
« Reply #7 on: June 23, 2011, 03:18:03 PM »
Take your Dremel Tool and cut off 2 coils of the spring inside the petcock. This will lessen the preload on the nylon cone.

Serafin

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Fuel petcock very hard to turn
« Reply #8 on: June 23, 2011, 09:01:17 PM »
Thanks all!
Didn't really want to replace with a stocker.....
Now I have a few options when I stop into the bike shop.

Brad

Smear a tiny bit of antisieze on the nylon packing, and the actuall steel valve. Grease the oring and your valve should rotate reasonably smooth. My 500's valve works nice and smooth, but my old '97 KX250 was very stiff. Some are KX's work smooth some don't.
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: Fuel petcock very hard to turn
« Reply #9 on: June 24, 2011, 04:40:02 AM »
my petcock is very hard to turn aswell
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Fuel petcock very hard to turn
« Reply #10 on: June 24, 2011, 05:28:51 AM »
My petcock is easier to pull than turn.
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: Fuel petcock very hard to turn
« Reply #11 on: June 24, 2011, 07:53:15 AM »

 Pass more gas with a Pingle! :-o

  Well for as much as they cost you Better Be passing more Gas! 8-)

http://www.pingelonline.com/fuel_valves.htm

Tuck\o/
"The Truth Has No Agenda"

Offline Green Fiend

  • Jr. Member
  • **
  • Posts: 47
Re: Fuel petcock very hard to turn
« Reply #12 on: June 26, 2011, 02:27:16 AM »
When I got my 2004 500, my petcock was pretty much froze up. I too needs pliers to open it. I ordered a OEM part off Kawasakipartswharehouse.com I think it was like $24.00. New one works like a dream.
2011 Service KX500AF, 2005 KX250, 2004 KX500, 2011 YZF450, 2011 KTMSX50 Mini, 2009 ZX10R

Offline crazyolbastard

  • Full Member
  • ***
  • Posts: 150
Re: Fuel petcock very hard to turn
« Reply #13 on: June 27, 2011, 01:59:11 PM »
wow Tuck ol boy,
that`s a bithchen gas passer
Crazy Ol Bastard