« previous next »
Pages: [1]   Go Down

Author Topic: crank seals which way in  (Read 2758 times)

0 Members and 1 Guest are viewing this topic.

Offline linetrash1975

  • Newbie
  • *
  • Posts: 2
crank seals which way in
« on: April 27, 2011, 11:54:06 AM »
 Which way do I install the crank seals in my 95 KX60? Wire spring out or wire spring in towards crank. I'm guessing wire seal goes toward oil in the Tranny but what about the flywheel side?
Thanks Jed
Logged

Offline Magnus

  • Jr. Member
  • **
  • Posts: 33
Re: crank seals which way in
« Reply #1 on: April 27, 2011, 12:56:06 PM »
pretty sure the side where the spring sits goes towards the crank, if I am wrong I am sure someone will correct me :-)
Logged

Offline linetrash1975

  • Newbie
  • *
  • Posts: 2
Re: crank seals which way in
« Reply #2 on: April 27, 2011, 02:01:40 PM »
 Thanks magnus, I'll hold off a bit till I get a definative answer, don't want to splitt it again.

Jed
Logged

Motorrad

  • Guest
Re: crank seals which way in
« Reply #3 on: April 27, 2011, 05:17:32 PM »
Quote from: Magnus on April 27, 2011, 12:56:06 PM
pretty sure the side where the spring sits goes towards the crank, if I am wrong I am sure someone will correct me :-)

Correct....
Logged
Pages: [1]   Go Up
« previous next »