Author Topic: Vibrations?????  (Read 2306 times)

0 Members and 1 Guest are viewing this topic.

Offline butchpatrick

  • Full Member
  • ***
  • Posts: 56
  • Legends never die!!!
Vibrations?????
« on: March 02, 2011, 01:56:28 PM »
I have a buddy and he told me he was rideing and his bike started to vibrate and the bike cut off and wont start back up??? Any advice???????

Offline meangreen

  • Jr. Member
  • **
  • Posts: 34
  • My old 89 KX250
Re: Vibrations?????
« Reply #1 on: March 02, 2011, 02:45:46 PM »
Could be a lot of things.  Sounds like inspection time.

Do some easy stuff first. (Do in order until problem found.)

1. Pull the flywheel cover and see if it came loose - it happens.

2. Pull spark plug and inspect for debris.

3. Pull pipe and shine flashlight into exhaust port while having a buddy slowly kick the bike over.

4. Pull cylinder and check for rod bearing damage.

5. Roll up your sleeves and dig in.

Bad vibes are caused by an imbalance in a rotating assembly.  There are many assemblies that rotate in your engine/tranny.  Keep that in mind when you roll your sleeves up.

Good luck.

MG



You know you are having fun when you have dirt on your teeth!

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: Vibrations?????
« Reply #2 on: March 09, 2011, 08:31:11 AM »
hey, did he get to have a look at the motor yet?
« Last Edit: March 09, 2011, 08:34:49 AM by 1989kawasaki »
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline butchpatrick

  • Full Member
  • ***
  • Posts: 56
  • Legends never die!!!
Re: Vibrations?????
« Reply #3 on: March 10, 2011, 11:53:17 AM »
ya he brought it over and more of the story came out. He hasent started the bike in like 7 years it's a 1996 RM 250 and the bike is in good shape. You can tell that the bike hasent been put into the dirt. Well I did a tune up and the bike fired up on mybe the 7th kick but kept dieing out and I seen that the choke was falling and not staying up long enough to make it run. Well after the bike fired up 2 more times the crank locked up and thats where im at on that one....Im saying the bottom end is shot.

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: Vibrations?????
« Reply #4 on: March 10, 2011, 11:55:06 AM »
yep it sounds like it is locked up, that sucks!
BTW i have a 1994 rm250
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline butchpatrick

  • Full Member
  • ***
  • Posts: 56
  • Legends never die!!!
Re: Vibrations?????
« Reply #5 on: March 15, 2011, 11:50:57 AM »
I heard for that year to like 98 thats common?? what do you think is a good price to pay to have it fixed? I got a price for him for about $500....thanks for all the help!!!

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: Vibrations?????
« Reply #6 on: March 15, 2011, 11:54:09 AM »
I heard for that year to like 98 thats common?? what do you think is a good price to pay to have it fixed? I got a price for him for about $500....thanks for all the help!!!

my 94 rm never had any problems like that. $500 sounds decent
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline butchpatrick

  • Full Member
  • ***
  • Posts: 56
  • Legends never die!!!
Re: Vibrations?????
« Reply #7 on: April 07, 2011, 11:46:36 AM »
89 thanks for the help,I havent been on for awhile...been working. The bike still in my garage, but he went out and picked up a nice KX 250. Were in the works of a deal and I might be able to get the bike for $200, if I put on some extras that he bought for his new bike. $600 ill have a real nice bike with getting it fixed!!

Offline NZ500

  • Full Member
  • ***
  • Posts: 72
Re: Vibrations?????
« Reply #8 on: April 16, 2011, 04:32:33 PM »
Hi.

$200 sounds real good. Just beware though it could cost more to rebuild than you think. Your crank journals could be worn and need hard chromed or crankshaft replaced and there could be hard bearing parts going through engine, scoring bore, piston, head etc. Other little bits and pieces worn out can all add to the rebuild cost. If all else fails though it has to be worth that in parts?

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: Vibrations?????
« Reply #9 on: April 16, 2011, 04:37:01 PM »
leftside crankcase journal insert worn

Offline butchpatrick

  • Full Member
  • ***
  • Posts: 56
  • Legends never die!!!
Re: Vibrations?????
« Reply #10 on: June 10, 2011, 05:13:39 AM »
kaw rider is that hard to change???