Author Topic: can someone take a pic of cable routing? (Read 4577 times)

1989kawasaki · « **on:** May 08, 2011, 03:35:24 PM »

hi i am in great need to see how to properly route my clutch cable on my 89 kx250. and maybe someone can post a picture of their cable routing on the kx500 because the 500 is the same as the 89 250. THANKS IN ADVANCE

IceRacer · « **Reply #1 on:** May 09, 2011, 06:45:06 AM »

pic like this?

1989kawasaki · « **Reply #2 on:** May 09, 2011, 06:50:02 AM »

no, i was hoping for pics of how the cable snakes through the frame and the triples and up to the perch.

Magnus · « **Reply #3 on:** May 09, 2011, 07:15:47 AM »

I have a picture of a team bike with the clutch cable routed outside the frame. I think it's the way to go since the cable get less kinks and therefore should last longer... heres a link with "how to" instructions if you are interested: http://www.kxriders.com/forums/index.php/topic,11.0.html
looks like this

serafin · « **Reply #4 on:** May 09, 2011, 07:59:11 AM »

I'll describe how mine is routed (03 KX500) the best i can. Sitting on the bike looking forward from the clutch perch over the top of the number plate bolt, then between the upper radiator mount and the radiator, then along the down tube, then between the middle radiator and its mount, then it crosses over to the left side of the engine but stays on the inside of the lower left radiator hose that goes to the head, then attaches to the lower cylinder. Hope that help you out.

serafin

1989kawasaki · « **Reply #5 on:** May 09, 2011, 08:42:40 AM »

I appreciate all your help but i cant really comprehend written instructions, i have to see it for myself . but here are my pics, is this how it is supposed to be routed?