Author Topic: "old Snappy" kicklever question  (Read 2845 times)

0 Members and 1 Guest are viewing this topic.

Tucson_Steve

  • Guest
"old Snappy" kicklever question
« on: July 05, 2004, 11:36:52 AM »
Well, it's time to make another donation to the kickstarter maker's retirement fund. Finally snapped this one off last weekend at the Blue Hills Area outside Saint Johns. Lots of steep places to get started again so all was not lost. I have an old 1992 KX500 and want to replace this time with the beefier newer model lever. According to the parts diagrams any lever assembly after 1998 will be the larger, stronger, unit...Is this correct?..thought I would check with you guys before writing the check...thanks........Steve

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
"old Snappy" kicklever question
« Reply #1 on: July 05, 2004, 12:29:11 PM »
Hey Steve, it was my understanding that ALL the kick levers manufactured after 2001(?) were the newer thicker design.

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
"old Snappy" kicklever question
« Reply #2 on: July 05, 2004, 04:54:32 PM »
Quote from: Paul
Hey Steve, it was my understanding that ALL the kick levers manufactured after 2001(?) were the newer thicker design.


That is correct, after busting a lever, I ordered a new one for a '90 kx500 which is the seriously fat one. So, I believe '89 through '04 are the same part # anyway.

Tucson_Steve

  • Guest
"old Snappy" kicklever question
« Reply #3 on: July 05, 2004, 04:56:21 PM »
Paul..from what I could decifer from the Kawi parts site the change was in 1998... up until then the assembly number was 13064-1165.....1998 and after it reads 13064-1201....as long as the thing fits.....ordering tomorrow..............thanks.......Steve