« previous next »
Pages: 1 [2]   Go Down

Author Topic: What The Best Intake Boot to use  (Read 11899 times)

0 Members and 1 Guest are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: What The Best Intake Boot to use
« Reply #15 on: January 06, 2011, 08:30:39 AM »
Quote from: livenlife699 on January 05, 2011, 01:20:10 PM
Im trying to figure out the same thing... :?  I have just about everything I need except my 17mm drill bit which is a pain in the butt to find!!!

I found a 17MM drill bit with a long arbor on eBay.
The biggest problem is that they are slightly under 17MM (16.96mm) and the holes on your frame measure close to 17.05MM.
So, you may have to ream it a bit once you drill them.
Mine now fits snug but by hand.
However, the 43/64" drill bit (0.672") equals 17.07MM and I think would be a better choice.
« Last Edit: January 06, 2011, 08:34:23 AM by sandblaster »
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline livenlife699

  • Full Member
  • ***
  • Posts: 57
Re: What The Best Intake Boot to use
« Reply #16 on: January 06, 2011, 10:48:08 AM »
Quote from: sandblaster on January 06, 2011, 08:30:39 AM
Quote from: livenlife699 on January 05, 2011, 01:20:10 PM
Im trying to figure out the same thing... :?  I have just about everything I need except my 17mm drill bit which is a pain in the butt to find!!!

I found a 17MM drill bit with a long arbor on eBay.
The biggest problem is that they are slightly under 17MM (16.96mm) and the holes on your frame measure close to 17.05MM.
So, you may have to ream it a bit once you drill them.
Mine now fits snug but by hand.
However, the 43/64" drill bit (0.672") equals 17.07MM and I think would be a better choice.
I have only found the 17mm on ebay and online but nowere local..what would my best bet be with getting my hands on the 43/64" bit? Must be a more common size being american?
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: What The Best Intake Boot to use
« Reply #17 on: January 06, 2011, 01:20:53 PM »
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline speedywent

  • Jr. Member
  • **
  • Posts: 19
Re: What The Best Intake Boot to use
« Reply #18 on: January 24, 2011, 04:55:19 PM »
99-02 KX 250 boot worked perfect with an aluminum adapter plate to adapt it to the airbox. 2008 KX 450F chassis. Good luck.
Logged

Offline jrkawiracer

  • Jr. Member
  • **
  • Posts: 14
Re: What The Best Intake Boot to use
« Reply #19 on: April 15, 2011, 08:44:34 AM »
does anyone have a pic of the adapter ring so i know kinda what is gona look like
Logged

Offline stevea100m

  • Full Member
  • ***
  • Posts: 123
Re: What The Best Intake Boot to use
« Reply #20 on: April 15, 2011, 04:20:28 PM »
If you check my build out you can kinda get an idea of what your gonna have to make
Logged

Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: What The Best Intake Boot to use
« Reply #21 on: April 16, 2011, 08:59:45 AM »
Logged
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline jbersano

  • Full Member
  • ***
  • Posts: 67
Re: What The Best Intake Boot to use
« Reply #22 on: April 25, 2011, 01:33:18 AM »
I used a kx250 2002 airboot on a 05 kx250f. Works GREAT!
Logged
Pages: 1 [2]   Go Up
« previous next »