Yet another Clutch question!!

[elmo]

Guys one of the few remaining issues i have with my 91 kx250 is i need a frigging winch to pull the clutch in!

Now does anyone know if i can get lighter springs for the pressure plate bolts? If this will help? or am i barking up the wrong tree completely?

I have an apiceo easy clutch on there but even with that it's like pulling Megan Fox! (extremely difficult for me, an i'm a big lad!)

[1989kawasaki]

id say to get oem springs and a MSR pro raptor clutch lever thing. and a new cable , and it will be good

[elmo]

Also i wanna get some new hubs and rims, do i have to get year specfic hubs or can i use ones from another year... If so does anyone know what ones i'm safe to use?

[1989kawasaki]

the front hub is the same on these models

Model (10):   
KX125-H1 (KX125) (1990)
KX125-H2 (KX125) (1991)
KX125-J1 (KX125) (1992)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)

the rear hub

Model (26):   
KDX200-E2 (KDX200) (1990)
KDX200-E3 (KDX200) (1991)
KDX200-E4 (KDX200) (1992)
KDX200-E5 (KDX200) (1993)
KDX200-E6 (KDX200) (1994)
KX125-H1 (KX125) (1990)
KX125-H2 (KX125) (1991)
KX125-J1 (KX125) (1992)
KX125-J2 (KX125) (1993)
KX125-K1 (KX125) (1994)
KX125-K2 (KX125) (1995)
KX125-K3 (KX125) (1996)
KX250-H1 (KX250) (1990)
KX250-H2 (KX250) (1991)
KX250-J1 (KX250) (1992)
KX250-J2 (KX250) (1993)
KX250-K1 (KX250) (1994)
KX250-K2 (KX250) (1995)
KX250-K3 (KX250) (1996)
KX500-E2 (KX500) (1990)
KX500-E3 (KX500) (1991)
KX500-E4 (KX500) (1992)
KX500-E5 (KX500) (1993)
KX500-E6 (KX500) (1994)
KX500-E7 (KX500) (1995)
KX500-E8 (KX500) (1996)

[elmo]

you are a star!