Author Topic: What Oil to use to run in a KX500 that has a new piston?  (Read 2688 times)

0 Members and 2 Guests are viewing this topic.

Offline bigbore

  • Jr. Member
  • **
  • Posts: 21
What Oil to use to run in a KX500 that has a new piston?
« on: March 25, 2011, 12:45:30 AM »
Hi All,

I will be running in my 1988 kx500 next week as soon as i receive my head back in the post (its off getting a de-comp mod at present).

I have fitted a new wiseco piston kit, standard bore etc.

I need to know what the best oil is to use to run the bike in? Ive heard different stories in favor of both; semi-synthetic and fully-synthetic.

Some say that semi is better as it helps the piston seat better with the barrel?

Any info or advise welcome.

Thanks.  :-D

Offline cbxracer30

  • Sr. Member
  • ****
  • Posts: 304
Re: What Oil to use to run in a KX500 that has a new piston?
« Reply #1 on: March 25, 2011, 12:52:33 AM »
I make sure I give all surfaces and bearings a good coating of the regular oil I run [semi-syn] and then add a little extra oil to the first tank-ful of fuel like 32/1 , I normally run 50/1.CBX
Yep, you can ride it - if YOU can start it !!

Offline kxraptor

  • Full Member
  • ***
  • Posts: 57
Re: What Oil to use to run in a KX500 that has a new piston?
« Reply #2 on: March 25, 2011, 01:08:58 AM »
Not doubting what works for you but extra pre-mix causes extra heat.

Offline Big Yac

  • Full Member
  • ***
  • Posts: 60
Re: What Oil to use to run in a KX500 that has a new piston?
« Reply #3 on: March 25, 2011, 04:20:41 AM »
I normally run Maxima Super-M mixed 50:1 with 93 octane gasoline.  I put a new top end in my bike last summer and just made sure to put a coating of my premix on the piston, bearings and such.  Ran the same fuel/oil mix as always just took it easy until I got several heat and cooling cycles on it.  She runs like a champ. 

Offline bigbore

  • Jr. Member
  • **
  • Posts: 21
Re: What Oil to use to run in a KX500 that has a new piston?
« Reply #4 on: March 28, 2011, 01:40:10 AM »
cheers for the info guys. much appreciated.