Author Topic: 04 KX500SF Done  (Read 16904 times)

0 Members and 1 Guest are viewing this topic.

Offline The Flyin Hawaiian

  • Hero Member
  • *****
  • Posts: 597
Re: 04 KX500SF Done
« Reply #15 on: June 22, 2011, 10:34:11 AM »
Thanks VW! I had the chance to take it out this weekend in some nice Southern NJ tight woods. It worked pretty good! It takes some getting used to since I havent ridden a 500 much in over 20 years! I rode it in some handlebar width, tight trail and with some clutch and throttle control I had it going almost as good as my 250. Its funny, Im usually on the gas much harder on the 250 in the same trails. I found myself listening to the engine and thinking I was just putting along but I know the scenery was going by real fast! Im running 14/49 gearing but may try a 48t this weekend just to smooth it out abit. I dont have much time on 450s either but I did ride a CRF450 in the woods a few years back and hated it! It was way too rammy feeling, too much throttle response and it felt stiff. Partly due to the aluminum frame. Ive ridden a number of al framed bikes over the years and everyone of them had a overly stiff feeling. Thats partly why I went with the steel frame. I have a 02 YZ426 and I think the 500 is easier to ride than that. The 500 feels much lighter also. It flicks between the trees very well and is awesome in the more open trail! I have a little bit of suspension dialing to do and get a bigger tank on it and it should be about done.
A couple of 03 and 04 KXs, a few YZs, 3 PE 400s, a DR and a TS.

Offline The Flyin Hawaiian

  • Hero Member
  • *****
  • Posts: 597
Re: 04 KX500SF Done
« Reply #16 on: August 26, 2011, 01:09:54 PM »
A little update. The last time I rode my 500 I sucked a reed. I was using a 03/04 KX250 reed cage (V Force 2) and intake. The reason was because the 500 intake would put the carb into the shock. The 250 intake seemed to smooth the power and pretty much flatten the upper mid to top end. It is much more restrictive compared to the 500 reed and intake. I did some research and found out that a 91-94 KDX250 uses the same reed cage as the 500. I ordered the intake manifold for a KDX250 and it works perfect, atleast fitment wise. Carb clears the shock and fits into the airbox boot better, its slightly longer. I havent had a chance to ride it yet, we've been battening down the hatches in preparation for Hurricane Irene. Hopefully it will pass by mid day on sunday and Ill get a chance to take it on a very soggy ride......providing that we have power and not under water here!
A couple of 03 and 04 KXs, a few YZs, 3 PE 400s, a DR and a TS.

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: 04 KX500SF Done
« Reply #17 on: August 26, 2011, 05:41:04 PM »

  Hey Flyin,
 I have a 38mm Kehin air stryker I just put away in a box not long ago.   If you want to try to run that I would be willing to ship it out if you are interested.   I understand the TMX has a shorter body and may be the ticket.   
  I was bored last month and decided to switch things up.
Let me know,  Croft_RW@Yahoo.com             

P.S. I'm Putting in a good word for all the folks looking at the next few Days facing the storms....
   Tuck\o/
"The Truth Has No Agenda"

Offline treedodgingfool

  • Full Member
  • ***
  • Posts: 66
  • Dirtbike Dork
Re: 04 KX500SF Done
« Reply #18 on: July 29, 2012, 10:05:11 AM »
Hey Flyin, when you gonna build my 500cc fuel incinerator?   :-D
Stay Healthy, Eat your Honey.