« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: KIPS BOLT MOD  (Read 27575 times)

0 Members and 3 Guests are viewing this topic.

Offline delphipro5

  • Sr. Member
  • ****
  • Posts: 262
KIPS BOLT MOD
« on: February 22, 2011, 03:20:38 PM »
Well, I figured you guys on here are thoroughly sick of having threads started on age old info that is already in a millon places on the forum. But I went through all of it and did not find any representation of what the bolt is supposed to look like. THIS is how to make a correct length kips bolt for your bike. The toughest part is finding a bolt to mod., I got mine on ebay! :lol:

 AS FOLLOWS:



I hope this clears things up on how to make one. Info on install/setup is on another thread, search function.  :wink:
« Last Edit: February 23, 2011, 02:59:21 AM by delphipro5 »
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KIPS BOLT MOD
« Reply #1 on: February 22, 2011, 03:24:52 PM »
Great Job! delphipro5
When I first started looking at this site I had no idea what the mod was or what it was suppose to do.
After reading several postings I finally figured out what it did  :-D
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline 1989kawasaki

  • Hero Member
  • *****
  • Posts: 1,017
  • my 89 cr250
    • youtube
Re: KIPS BOLT MOD
« Reply #2 on: February 22, 2011, 03:28:21 PM »
whats a kips bolt mod supposed to do?
Logged
bikes

1977 RD400
1989 CR250
1988 CR500
1978 Z50
2009 Harley super glide custom

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: KIPS BOLT MOD
« Reply #3 on: February 22, 2011, 03:48:55 PM »
you forgot to say why a guy would what to do this mod.

Here are 2 bolt mod bolt that i'm sure the owner would sell since they are big.
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KIPS BOLT MOD
« Reply #4 on: February 22, 2011, 03:51:01 PM »
Hey kaw rider.
Are you still making a batch of the bolts?
I still need two if you are  :-D
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: KIPS BOLT MOD
« Reply #5 on: February 22, 2011, 03:52:20 PM »
Quote from: sandblaster on February 22, 2011, 03:51:01 PM
Hey kaw rider.
Are you still making a batch of the bolts?
I still need two if you are  :-D

Hah... I just PM'ed him too..
Logged

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: KIPS BOLT MOD
« Reply #6 on: February 23, 2011, 01:09:58 AM »
Quote from: 1989kawasaki on February 22, 2011, 03:28:21 PM
whats a kips bolt mod supposed to do?

It keeps the KIPS valves from over rotating closed. Can make it a little tougher to kick, but not bad. It does make the power come on sooner it seems.

Don't forget to reset the governor arm!!!
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline traileater

  • Full Member
  • ***
  • Posts: 53
Re: KIPS BOLT MOD
« Reply #7 on: February 23, 2011, 02:31:20 AM »
What years/models does this apply to?
Logged
2000 kx250
2002 crf450
1995 CR250

Offline delphipro5

  • Sr. Member
  • ****
  • Posts: 262
Re: KIPS BOLT MOD
« Reply #8 on: February 23, 2011, 02:54:13 AM »
  :? I simply posted a drawing for those who want to make them. ALL the rest you can find by looking at the endless amount of chat on this subject. I did not expect this to turn into a 3 page thread! Just was expecting someone to correct me on my measurements. But your probably talking thousandths of a mm so I think that the demensions are correct. Thanks for the pic kaw, thats the first phisical representation I have seen of what these are supposed to look like. I am thinking of making a run of these myself with low socket cap bolts. It's gonna be a while so don't ask me for one yet!  :lol:
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: KIPS BOLT MOD
« Reply #9 on: February 23, 2011, 03:00:14 AM »
I believe that you need to set the govener arm up with the stock kips bolt and then install the new bolt for it to work properly.
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline delphipro5

  • Sr. Member
  • ****
  • Posts: 262
Re: KIPS BOLT MOD
« Reply #10 on: February 25, 2011, 01:24:24 PM »
In the for sale section of the forum Kaw Rider has the steath KIPS bolt for sale $39 bucks. It is exactly what I was going to make a run of. Low socket cap type bolt and everything! Duh, I can't beleive it took me this long to find that here!! :lol: I guess if you need ANYTHING ask him, he will prob. have it!
 AND since it already made it's way onto this thread, anyone want to chime in on the how's of setting the gov. arm to make this mod work correctly?
Quote from: BDI on February 23, 2011, 03:00:14 AM
I believe that you need to set the govener arm up with the stock kips bolt and then install the new bolt for it to work properly.

Is that right?

I promise, I won't post on this subject again. :-P
« Last Edit: February 25, 2011, 01:26:16 PM by delphipro5 »
Logged

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: KIPS BOLT MOD
« Reply #11 on: February 25, 2011, 01:40:50 PM »
You take out the stock KIPS bolt.  Install the new one.  Remove the governer  arm cover.  Loosen the 10mm nut on the arm to let the KIPS valve reset on the new bolt.  Then retighten the governer arm not and put the cover back on.
« Last Edit: February 25, 2011, 01:54:28 PM by alward25 »
Logged
"Let there be light"

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: KIPS BOLT MOD
« Reply #12 on: February 25, 2011, 01:43:56 PM »
you what some pressue on the linkage
Logged

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: KIPS BOLT MOD
« Reply #13 on: February 25, 2011, 01:56:55 PM »
No pressure on the linkage.


Quote from: kaw rider on February 25, 2011, 01:43:56 PM
you what some pressue on the linkage
Logged
"Let there be light"

Offline 2-Stroke Tom

  • Full Member
  • ***
  • Posts: 160
Re: KIPS BOLT MOD
« Reply #14 on: March 05, 2011, 05:00:06 AM »
I got the KIPS bolt mod from kaw rider yesterday, and now I'm getting ready to install. By reading this post, there seems to be a difference in opinion on whether or not there should be pressure on the linkage. I've always just let the KIPS valve rest against the bolt and then tighten governor arm nut, but I've never done any mods to KIPS before. Since this is not a stock part, I want to set this up correctly. Seems like kaw rider has done his homework with this mod, so when he said put some pressure on the linkage, this got my attention. How much tension should be applied. Also, I'm assuming the stock metal washer/gasket is should be used correct?
Logged
Pages: [1] 2 3 4   Go Up
« previous next »