« previous next »
Pages: [1]   Go Down

Author Topic: Paddle Tire Riding  (Read 4625 times)

0 Members and 1 Guest are viewing this topic.

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Paddle Tire Riding
« on: June 15, 2003, 08:07:23 AM »
I am getting ready to mount my  560X18 paddle tire on my KX5 and I was wondering how different the bike will handle. Does it tend to slip out from under you on turns? Is it really hard to keep the front end down? I have never run a paddle tire before, so I was wondering if you guys could give me some tips!

Thanks

Alan
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Paddle Tire Riding
« Reply #1 on: June 15, 2003, 10:32:23 AM »
With that big 5.60X18 @ 10 blades you'll have a good time trying to keep the front down when you get after it, otherwise I think it's pretty much the same ride.
Logged

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
HELP!
« Reply #2 on: June 15, 2003, 11:29:08 AM »
Paul, I am having problems with the chain adjustment with the paddle tire! I mounted the wheel all the back as you suggested with the stock sprockets. When I added the extra link it is way to loose. Any suggestions? I don't know if they make a half link for my O - ring chain!


Help

Alan
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Paddle Tire Riding
« Reply #3 on: June 15, 2003, 01:04:08 PM »
Paul, what do you think about going to a 45 tooth on the rear?

Alan
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Paddle Tire Riding
« Reply #4 on: June 15, 2003, 03:44:20 PM »
Thats what I normally run on mine. I have 13,14,15,45,47,49. I use the 14/49 combo for the dunes and thats probly why the extra link fit perfectly for me. Sorry for the delay in responding - doing the dad thing today :D

Quote from: alan

Paul, what do you think about going to a 45 tooth on the rear?

Alan
Logged

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Paddle Tire Riding
« Reply #5 on: June 16, 2003, 02:20:45 AM »
Ok Paul, that is the problem! I thought you told me you were using stock 14 and 47, I will order a 49 and I think that will do it!

Thanks

Alan
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

sdkx500

  • Guest
Paddle Tire Riding
« Reply #6 on: January 11, 2004, 05:04:43 AM »
Paul.....
so i am ordering a new chain.  Do i get a stock length (114?) link chain and add a link? to run a 49 tooth rear with my paddle tire?  Or do i just order a longer chain to start with?
Logged

jeffink.c.

  • Guest
Paddle Tire Riding
« Reply #7 on: May 07, 2004, 01:32:45 PM »
I run a 12 cup VIPER on my K5 and a King front ribed and carve dunes like its on rails.
Logged

Fookeneh

  • Guest
Paddle Tire Riding
« Reply #8 on: May 09, 2004, 06:29:46 PM »
i used a turbo 8 paddle on my 250 in oregon. Should I get a 10 or 12 paddle for my 500?
Logged

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Paddle Tire Riding
« Reply #9 on: May 09, 2004, 06:32:58 PM »
Yes, I ran 1 8 blade on my 500 and ripped the blades off it  :|
Logged

kawdude

  • Guest
Paddle Tire Riding
« Reply #10 on: May 10, 2004, 04:51:45 AM »
Quote from: Paul
Yes, I ran 1 8 blade on my 500 and ripped the blades off it  :|


LOL!

500cc power...can't beat it!!!
Logged

Fookeneh

  • Guest
Paddle Tire Riding
« Reply #11 on: May 24, 2004, 12:39:28 PM »
can you get a 10 or 12 cup for the stock wheel, or do you have to get a kx 250 rim on there?     I used a knobby on the front of the 250,I'm thinking of a sand tire for the front of my 5 . Are they worth it?
Logged
Pages: [1]   Go Up
« previous next »